[Public-List] [Member-List] interior problems

Jonathan Bresler 262alberg30 at gmail.com
Thu Nov 9 11:13:33 PST 2017


Gordon,

Have not opened up that part of Constance yet.  The floor in the v-berth is
not in the best shape on #262. Guessing that our boats should be quite
similar given that they are within 13 numbers of each other. Look forword
to hearing what you find.  Photos as well?

Best wishes
Jonathan

On Thu, Nov 9, 2017 at 8:02 AM gordon white via Member-List <
member-list at lists.alberg30.org> wrote:

>     My boat is a pre-liner, s/n 275. I have just noticed that the cabin
> sole in the forward cabin (where the V-berth is) is quite "soggy." It
> was solid last spring, but now appears ready to fall in.
>
>      Has anyone else had such a problem?
>
>      Before I begin tearing up the old planking, I thought I'd ask so I
> might know what's under there. (There is no leak in the water tank,
> which was my first thought as to cause.)
>
>      My first idea is to cut a piece of plywood to the correct size,
> varnish it with several coats and put it down. I assume there are
> stringers to which the sole is fastened?
>
>      Also:   The hanging locker door (which doubles as a privacy door
> for the V-berth compartment) won't close on the V-Berth side. It closes
> all right on the hanging locker but is now about 3/16" too wide to close
> on the V-berth compartment. It used to be tight but would close. I
> cannot see any cracks or loose joints in the door needing re-gluing.
>
>          My first assumption is that the stays have pulled in the sides
> of the boat sufficiently to cramp in the woodwork, though I can't see
> other indications of that. I had aluminum plates mounted years  ago on
> each side of the beam under the mast to deal with depression of the mast
> step. As I recall, at that time the mast step was jacked up a bit when
> that was done.
>
>      The only cure I can come up with is to plane enough off the side of
> the door to allow it to close.
>
>      Anyone else have this problem? Is it likely related to the "dimple"
> problem someone else  described a while ago? I cannot discern any
> dimples in the topsides of the boat.
>
>
> - Gordon White, Brigadoon II
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Member-List mailing list
> Member-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/member-list-alberg30.org
>
-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD


More information about the Public-List mailing list