[Public-List] vent(s) for replacement holding tank

Hernán Scarnichia hernanscar at gmail.com
Thu Nov 16 15:27:10 PST 2017


Rod
I have an Air Head, mounted it fore and aft it is a tight fit and if you
have very long legs this might not work for you.
no smell and only a barely noticeable humm from the fan.
You have to keep an eye on the moisture level of the moss or coconut
fibers. one time it got too wet (not sure why yet) and then it smells. just
add more fibers to dry it out.
very easy to empty in a garbage bag and dispose of.
for the use you describe I think will work very well.

On Thu, Nov 16, 2017 at 12:37 PM, Stephen Gwyn via Public-List <
public-list at lists.alberg30.org> wrote:

>
> A friend of mine has an A30 with a single vent with no
> problems. His tank is in the closet behind the head, so
> and the run to the vent is very short.
>
> On a related note:
> How long has the installation described at:
> http://www.alberg30.org/maintenance/Head/RaritanNewer/4-plumbing.html
> which is uses PVC pipe instead of hose been in operation. The page says
> one year, but I'm pretty it's been saying one year for 10 years now.
>
> I've never understood why you can't use PVC pipe on a boat. You're always
> told it will break as the boat flexes, but it will bend a lot more than a
> boat does.
> The same guys that insist on selling you sanitation hose at 10$/foot
> instead
> of cheap PVC pipe are perfectly happy to sell you a head with a PVC pump
> unit.
>
>
>
>
>
>
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list