[Public-List] Grease to aid assembly

Michael Connolly crufone at comcast.net
Fri Nov 24 09:03:50 PST 2017


Good Tip 

----- Original Message -----

From: "Greg Roberts via Public-List" <public-list at lists.alberg30.org> 
To: public-list at lists.alberg30.org 
Cc: "Greg Roberts" <greg at midnight-oil.us> 
Sent: Thursday, November 23, 2017 1:39:09 PM 
Subject: [Public-List] Grease to aid assembly 



I had a rigger teach me to use shaving cream/gel when replacing delrin ball bearings. Washes right out. 
GregAyla 

-------- Original message -------- 
From: public-list-request at lists.alberg30.org 
Date: 11/23/17 09:19 (GMT-08:00) 
To: public-list at lists.alberg30.org 
Subject: Public-List Digest, Vol 3576, Issue 3 

Send Public-List mailing list submissions to 
public-list at lists.alberg30.org 

To subscribe or unsubscribe via the World Wide Web, visit 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
or, via email, send a message with subject or body 'help' to 
public-list-request at lists.alberg30.org 

You can reach the person managing the list at 
public-list-owner at lists.alberg30.org 

When replying, please edit your Subject line so it is more specific 
than "Re: Contents of Public-List digest..." 


Please do NOT include the entire digest in your reply! 
====================================================== 



Today's Topics: 

1. Re: Tiller wobble and possible fix. (Anders Bro) 
2. Re: Tiller wobble and possible fix. (Chris Martin) 
3. Re: Tiller wobble and possible fix. (Andrew Johns) 


---------------------------------------------------------------------- 

Message: 1 
Date: Thu, 23 Nov 2017 11:30:24 -0500 
From: Anders Bro <abro.gtu at gmail.com> 
To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org> 
Subject: Re: [Public-List] Tiller wobble and possible fix. 
Message-ID: 
<CACEd84tdGGfGv_1FHTwMa4DagbrYu9ndGKUxnacatvxfpH6nZw at mail.gmail.com> 
Content-Type: text/plain; charset="UTF-8" 

Might brass work? Brass shim stock is easy to find at machinist supply 
stores, and perhaps a car parts store? 

On Nov 23, 2017 11:01 AM, "Jonathan Bresler via Public-List" < 
public-list at lists.alberg30.org> wrote: 

> Gord, Thank you. Was afraid of that the corrosion issue would rear its 
> ugly head. 
> 
> The bronze washer idea sounds worthwhile looking into. No problem having a 
> washer on one side only...not an aesthetic issue for me. Might be hard to 
> find one 
> thin enough. Currently there are four layers of beer can shim stock which 
> might be 
> 0.065mm thick each layer or 0.26mm total. That's pretty thin. Seems that 
> there is 
> phospor bronze shim stock available in a suitable thickness from 
> Lyonindustries 
> http://lyonindustries.com/?page_id=9 . They even have an assortment 
> 6" x 12" assortment contains one piece of each of the following sizes: 
> .005, .008, .010, .013, .016, .020, .025, .032 
> 
> Gord, how about phosphor bronze ? 
> 
> Jonathan 
> 
> http://www.beveragecan.info/en/inform-me/advantages-of-cans/ 
> 
> On Thu, Nov 23, 2017 at 7:49 AM, Joseph Balderson via Public-List < 
> public-list at lists.alberg30.org> wrote: 
> 
> > Spoken like a true pommy. Eh? 
> > 
> > On Nov 22, 2017 10:06 AM, "Michael Connolly via Public-List" < 
> > public-list at lists.alberg30.org> wrote: 
> > 
> > > Now wait a minute. All folks know that Canadian beer is far superior to 
> > > anything made in the states............................ 
> > > Jonathan, 
> > > I have solved this issue on several boats using bronze washers. The 
> > rudder 
> > > head and tiller fitting on our boats should be bronze. A washer on just 
> > one 
> > > side is fine. If you are finicky about this you can pare down the 
> washers 
> > > so there is an equal number on each side and the tiller is centered so 
> to 
> > > speak. Yes I have been known to do that. 
> > > BTW a bit of grease on the washers helps to hold them in position 
> whilst 
> > > aligning them for the bolt. 
> > > Happy driving..................oh and Thanksgiving! 
> > > Michael #133 
> > > 
> > > 
> > > ----- Original Message ----- 
> > > 
> > > From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org> 
> > > To: "George Dinwiddie via Public-List" <public-list at lists.alberg30.org 
> > 
> > > Cc: "Gordon Laco" <mainstay at csolve.net> 
> > > Sent: Tuesday, November 21, 2017 10:23:31 PM 
> > > Subject: Re: [Public-List] Tiller wobble and possible fix. 
> > > 
> > > Yes, you?re guaranteeing corrosion damage, and the aluminium is too 
> soft 
> > > to last long in that application. 
> > > 
> > > A permanent cure would be to build up the inside bearing surfaces of 
> the 
> > > rudder head with brazing, then grind and sand it down to fit. Not 
> > difficult 
> > > to do, but this will be a lasting solution. 
> > > 
> > > Gord 
> > > #426 Surprise 
> > > 
> > > On 2017-11-21, 8:12 PM, "Public-List on behalf of Jonathan Bresler via 
> > > Public-List" <public-list-bounces at lists.alberg30.org on behalf of 
> > > public-list at lists.alberg30.org> wrote: 
> > > 
> > > Folks, 
> > > 
> > > Got tiller wobble, The metal H shaped section connecting the tiller to 
> > the 
> > > rudder head fitting does not fit as tightly as I would like. Initial 
> > > movements of the tiller take up slack then finally start to move the 
> > > rudder. Decided I needed to do something about this. 
> > > 
> > > Obtained two pieces of top shelf aluminum shim stock from the side of a 
> > > Heinekin beer car. Folded the two pieces in half. Trimmed the pieces to 
> > > match the height of the H fitting and a similar length. Drilled a 3/8" 
> > hole 
> > > in the center of each of the two. Installed one shim on each side of 
> the 
> > > rudder head fitting between the rudder head and the tiller H fitting. 
> > > 
> > > Went sailing today. Comparatively NO wobble. Nice tight response. 
> > > Shouid have done this a while ago. Hoping that the aluminum shim stock 
> is 
> > > softer than other metals, bronze for the rudder head, and steel(?) for 
> > the 
> > > H fitting. Would be happy to replace the shim stock every year in order 
> > to 
> > > prevent wear of the other parts. 
> > > 
> > > Thoughts? Am I risking corrosion damage? 
> > > 
> > > Jonathan 
> > > 
> > > P.S. Stole the idea of using beer can shim stock from Robert Pirsig's 
> > > _Zen_and_the_Art_of_Motorcycle_Maintenance_. Hard to believe that the 
> > book 
> > > is forty-three years old now. 
> > > 
> > > -- 
> > > Jonathan M Bresler 
> > > S/V Constance Alberg 30 #262 
> > > Annapolis/Eastport MD 
> > > _______________________________________________ 
> > > These businesses support your Association: 
> > > http://www.alberg30.org/store/A30supporters.html 
> > > Please support them. 
> > > _______________________________________________ 
> > > Public-List mailing list 
> > > Public-List at lists.alberg30.org 
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > 
> > > 
> > > 
> > > _______________________________________________ 
> > > These businesses support your Association: 
> > > http://www.alberg30.org/store/A30supporters.html 
> > > Please support them. 
> > > _______________________________________________ 
> > > Public-List mailing list 
> > > Public-List at lists.alberg30.org 
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > 
> > > _______________________________________________ 
> > > These businesses support your Association: 
> > > http://www.alberg30.org/store/A30supporters.html 
> > > Please support them. 
> > > _______________________________________________ 
> > > Public-List mailing list 
> > > Public-List at lists.alberg30.org 
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > 
> > _______________________________________________ 
> > These businesses support your Association: 
> > http://www.alberg30.org/store/A30supporters.html 
> > Please support them. 
> > _______________________________________________ 
> > Public-List mailing list 
> > Public-List at lists.alberg30.org 
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > 
> 
> 
> 
> -- 
> Jonathan M Bresler 
> S/V Constance Alberg 30 #262 
> Annapolis/Eastport MD 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 


------------------------------ 

Message: 2 
Date: Thu, 23 Nov 2017 16:57:16 +0000 (UTC) 
From: Chris Martin <notcmartin at yahoo.com> 
To: Jonathan Bresler via Public-List <public-list at lists.alberg30.org> 
Subject: Re: [Public-List] Tiller wobble and possible fix. 
Message-ID: <610901039.2021909.1511456236360 at mail.yahoo.com> 
Content-Type: text/plain; charset=UTF-8 

Hi 
If you are really going full ADD on this, like I have been known to do, this should work?https://www.mcmaster.com/#93490a007/=1adrho9 
On Thursday, November 23, 2017, 11:18:42 AM EST, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote: 

Haven't seen any.? Have telfon tape and telfon based lubricants. 
But its a good idea!? ? MSC Direct seems to have something that might 
fit 
Seem to recall that the tiller head bolt is 3/8", at least I used a 3/8" 
drill bit to drill the aluminum to fit the bolt. 

Jonathan 

https://www.mscdirect.com/browse/tn/?searchterm=teflon+shim&hdrsrh=true#navid=4287872381&searchterm=teflon+shim&lh=n 
Made in USA - 3/8 Inch Screw, 0.39 Inch Inside Diameter, 0.875 Inch Outside 
Diameter, 0.062 Inch Thick, Flat Washer - PTFE, Uncoated, 0.057 Inch Min 
Thickness, 0.395 Inch Max Inside Diameter 
<https://www.mscdirect.com/product/details/05404330> 

On Thu, Nov 23, 2017 at 11:02 AM, Mike Lehman via Public-List < 
public-list at lists.alberg30.org> wrote: 

> Why not a thin piece of teflon 
> 
> On Nov 23, 2017 11:01 AM, "Jonathan Bresler via Public-List" < 
> public-list at lists.alberg30.org> wrote: 
> 
> > Gord,? Thank you. Was afraid of that the corrosion issue would rear its 
> > ugly head. 
> > 
> > The bronze washer idea sounds worthwhile looking into.? No problem 
> having a 
> > washer on one side only...not an aesthetic issue for me.? Might be hard 
> to 
> > find one 
> > thin enough.? Currently there are four layers of beer can shim stock 
> which 
> > might be 
> > 0.065mm thick each layer or 0.26mm total.? That's pretty thin.? Seems 
> that 
> > there is 
> > phospor bronze shim stock available in a suitable thickness from 
> > Lyonindustries 
> > http://lyonindustries.com/?page_id=9 .? They even have an assortment 
> > 6" x 12" assortment contains one piece of each of the following sizes: 
> > .005, .008, .010, .013, .016, .020, .025, .032 
> > 
> > Gord, how about phosphor bronze ? 
> > 
> > Jonathan 
> > 
> > http://www.beveragecan.info/en/inform-me/advantages-of-cans/ 
> > 
> > On Thu, Nov 23, 2017 at 7:49 AM, Joseph Balderson via Public-List < 
> > public-list at lists.alberg30.org> wrote: 
> > 
> > > Spoken like a true pommy. Eh? 
> > > 
> > > On Nov 22, 2017 10:06 AM, "Michael Connolly via Public-List" < 
> > > public-list at lists.alberg30.org> wrote: 
> > > 
> > > > Now wait a minute. All folks know that Canadian beer is far superior 
> to 
> > > > anything made in the states............................ 
> > > > Jonathan, 
> > > > I have solved this issue on several boats using bronze washers. The 
> > > rudder 
> > > > head and tiller fitting on our boats should be bronze. A washer on 
> just 
> > > one 
> > > > side is fine. If you are finicky about this you can pare down the 
> > washers 
> > > > so there is an equal number on each side and the tiller is centered 
> so 
> > to 
> > > > speak. Yes I have been known to do that. 
> > > > BTW a bit of grease on the washers helps to hold them in position 
> > whilst 
> > > > aligning them for the bolt. 
> > > > Happy driving..................oh and Thanksgiving! 
> > > > Michael #133 
> > > > 
> > > > 
> > > > ----- Original Message ----- 
> > > > 
> > > > From: "Gordon Laco via Public-List" <public-list at lists.alberg30.org> 
> > > > To: "George Dinwiddie via Public-List" <public-list at lists.alberg30. 
> org 
> > > 
> > > > Cc: "Gordon Laco" <mainstay at csolve.net> 
> > > > Sent: Tuesday, November 21, 2017 10:23:31 PM 
> > > > Subject: Re: [Public-List] Tiller wobble and possible fix. 
> > > > 
> > > > Yes, you?re guaranteeing corrosion damage, and the aluminium is too 
> > soft 
> > > > to last long in that application. 
> > > > 
> > > > A permanent cure would be to build up the inside bearing surfaces of 
> > the 
> > > > rudder head with brazing, then grind and sand it down to fit. Not 
> > > difficult 
> > > > to do, but this will be a lasting solution. 
> > > > 
> > > > Gord 
> > > > #426 Surprise 
> > > > 
> > > > On 2017-11-21, 8:12 PM, "Public-List on behalf of Jonathan Bresler 
> via 
> > > > Public-List" <public-list-bounces at lists.alberg30.org on behalf of 
> > > > public-list at lists.alberg30.org> wrote: 
> > > > 
> > > > Folks, 
> > > > 
> > > > Got tiller wobble, The metal H shaped section connecting the tiller 
> to 
> > > the 
> > > > rudder head fitting does not fit as tightly as I would like. Initial 
> > > > movements of the tiller take up slack then finally start to move the 
> > > > rudder. Decided I needed to do something about this. 
> > > > 
> > > > Obtained two pieces of top shelf aluminum shim stock from the side 
> of a 
> > > > Heinekin beer car. Folded the two pieces in half. Trimmed the pieces 
> to 
> > > > match the height of the H fitting and a similar length. Drilled a 
> 3/8" 
> > > hole 
> > > > in the center of each of the two. Installed one shim on each side of 
> > the 
> > > > rudder head fitting between the rudder head and the tiller H fitting. 
> > > > 
> > > > Went sailing today. Comparatively NO wobble. Nice tight response. 
> > > > Shouid have done this a while ago. Hoping that the aluminum shim 
> stock 
> > is 
> > > > softer than other metals, bronze for the rudder head, and steel(?) 
> for 
> > > the 
> > > > H fitting. Would be happy to replace the shim stock every year in 
> order 
> > > to 
> > > > prevent wear of the other parts. 
> > > > 
> > > > Thoughts? Am I risking corrosion damage? 
> > > > 
> > > > Jonathan 
> > > > 
> > > > P.S. Stole the idea of using beer can shim stock from Robert Pirsig's 
> > > > _Zen_and_the_Art_of_Motorcycle_Maintenance_. Hard to believe that 
> the 
> > > book 
> > > > is forty-three years old now. 
> > > > 
> > > > -- 
> > > > Jonathan M Bresler 
> > > > S/V Constance Alberg 30 #262 
> > > > Annapolis/Eastport MD 
> > > > _______________________________________________ 
> > > > These businesses support your Association: 
> > > > http://www.alberg30.org/store/A30supporters.html 
> > > > Please support them. 
> > > > _______________________________________________ 
> > > > Public-List mailing list 
> > > > Public-List at lists.alberg30.org 
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________ 
> > > > These businesses support your Association: 
> > > > http://www.alberg30.org/store/A30supporters.html 
> > > > Please support them. 
> > > > _______________________________________________ 
> > > > Public-List mailing list 
> > > > Public-List at lists.alberg30.org 
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > 
> > > > _______________________________________________ 
> > > > These businesses support your Association: 
> > > > http://www.alberg30.org/store/A30supporters.html 
> > > > Please support them. 
> > > > _______________________________________________ 
> > > > Public-List mailing list 
> > > > Public-List at lists.alberg30.org 
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > 
> > > _______________________________________________ 
> > > These businesses support your Association: 
> > > http://www.alberg30.org/store/A30supporters.html 
> > > Please support them. 
> > > _______________________________________________ 
> > > Public-List mailing list 
> > > Public-List at lists.alberg30.org 
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > 
> > 
> > 
> > 
> > -- 
> > Jonathan M Bresler 
> > S/V Constance Alberg 30 #262 
> > Annapolis/Eastport MD 
> > _______________________________________________ 
> > These businesses support your Association: 
> > http://www.alberg30.org/store/A30supporters.html 
> > Please support them. 
> > _______________________________________________ 
> > Public-List mailing list 
> > Public-List at lists.alberg30.org 
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 



-- 
Jonathan M Bresler 
S/V Constance Alberg 30 #262 
Annapolis/Eastport MD 
_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


------------------------------ 

Message: 3 
Date: Thu, 23 Nov 2017 12:19:02 -0500 
From: Andrew Johns <johnsab9 at gmail.com> 
To: Alberg 30 Public List -- open to all 
<public-list at lists.alberg30.org> 
Subject: Re: [Public-List] Tiller wobble and possible fix. 
Message-ID: 
<CAM5xwU75EkwLc3xQ-HXCLj0qtYrcmgLa1PswixjUK0vd=ctZyw at mail.gmail.com> 
Content-Type: text/plain; charset="UTF-8" 

A UHMW washer may also be a good choice. A bag of them is just a few 
dollars an will not wear the rudder stock. 

On Nov 23, 2017 11:57 AM, "Chris Martin via Public-List" < 
public-list at lists.alberg30.org> wrote: 

> Hi 
> If you are really going full ADD on this, like I have been known to do, 
> this should work https://www.mcmaster.com/#93490a007/=1adrho9 
> On Thursday, November 23, 2017, 11:18:42 AM EST, Jonathan Bresler via 
> Public-List <public-list at lists.alberg30.org> wrote: 
> 
> Haven't seen any. Have telfon tape and telfon based lubricants. 
> But its a good idea! MSC Direct seems to have something that might 
> fit 
> Seem to recall that the tiller head bolt is 3/8", at least I used a 3/8" 
> drill bit to drill the aluminum to fit the bolt. 
> 
> Jonathan 
> 
> https://www.mscdirect.com/browse/tn/?searchterm=teflon+ 
> shim&hdrsrh=true#navid=4287872381&searchterm=teflon+shim&lh=n 
> Made in USA - 3/8 Inch Screw, 0.39 Inch Inside Diameter, 0.875 Inch Outside 
> Diameter, 0.062 Inch Thick, Flat Washer - PTFE, Uncoated, 0.057 Inch Min 
> Thickness, 0.395 Inch Max Inside Diameter 
> <https://www.mscdirect.com/product/details/05404330> 
> 
> On Thu, Nov 23, 2017 at 11:02 AM, Mike Lehman via Public-List < 
> public-list at lists.alberg30.org> wrote: 
> 
> > Why not a thin piece of teflon 
> > 
> > On Nov 23, 2017 11:01 AM, "Jonathan Bresler via Public-List" < 
> > public-list at lists.alberg30.org> wrote: 
> > 
> > > Gord, Thank you. Was afraid of that the corrosion issue would rear its 
> > > ugly head. 
> > > 
> > > The bronze washer idea sounds worthwhile looking into. No problem 
> > having a 
> > > washer on one side only...not an aesthetic issue for me. Might be hard 
> > to 
> > > find one 
> > > thin enough. Currently there are four layers of beer can shim stock 
> > which 
> > > might be 
> > > 0.065mm thick each layer or 0.26mm total. That's pretty thin. Seems 
> > that 
> > > there is 
> > > phospor bronze shim stock available in a suitable thickness from 
> > > Lyonindustries 
> > > http://lyonindustries.com/?page_id=9 . They even have an assortment 
> > > 6" x 12" assortment contains one piece of each of the following sizes: 
> > > .005, .008, .010, .013, .016, .020, .025, .032 
> > > 
> > > Gord, how about phosphor bronze ? 
> > > 
> > > Jonathan 
> > > 
> > > http://www.beveragecan.info/en/inform-me/advantages-of-cans/ 
> > > 
> > > On Thu, Nov 23, 2017 at 7:49 AM, Joseph Balderson via Public-List < 
> > > public-list at lists.alberg30.org> wrote: 
> > > 
> > > > Spoken like a true pommy. Eh? 
> > > > 
> > > > On Nov 22, 2017 10:06 AM, "Michael Connolly via Public-List" < 
> > > > public-list at lists.alberg30.org> wrote: 
> > > > 
> > > > > Now wait a minute. All folks know that Canadian beer is far 
> superior 
> > to 
> > > > > anything made in the states............................ 
> > > > > Jonathan, 
> > > > > I have solved this issue on several boats using bronze washers. The 
> > > > rudder 
> > > > > head and tiller fitting on our boats should be bronze. A washer on 
> > just 
> > > > one 
> > > > > side is fine. If you are finicky about this you can pare down the 
> > > washers 
> > > > > so there is an equal number on each side and the tiller is centered 
> > so 
> > > to 
> > > > > speak. Yes I have been known to do that. 
> > > > > BTW a bit of grease on the washers helps to hold them in position 
> > > whilst 
> > > > > aligning them for the bolt. 
> > > > > Happy driving..................oh and Thanksgiving! 
> > > > > Michael #133 
> > > > > 
> > > > > 
> > > > > ----- Original Message ----- 
> > > > > 
> > > > > From: "Gordon Laco via Public-List" <public-list at lists.alberg30. 
> org> 
> > > > > To: "George Dinwiddie via Public-List" <public-list at lists.alberg30. 
> > org 
> > > > 
> > > > > Cc: "Gordon Laco" <mainstay at csolve.net> 
> > > > > Sent: Tuesday, November 21, 2017 10:23:31 PM 
> > > > > Subject: Re: [Public-List] Tiller wobble and possible fix. 
> > > > > 
> > > > > Yes, you?re guaranteeing corrosion damage, and the aluminium is too 
> > > soft 
> > > > > to last long in that application. 
> > > > > 
> > > > > A permanent cure would be to build up the inside bearing surfaces 
> of 
> > > the 
> > > > > rudder head with brazing, then grind and sand it down to fit. Not 
> > > > difficult 
> > > > > to do, but this will be a lasting solution. 
> > > > > 
> > > > > Gord 
> > > > > #426 Surprise 
> > > > > 
> > > > > On 2017-11-21, 8:12 PM, "Public-List on behalf of Jonathan Bresler 
> > via 
> > > > > Public-List" <public-list-bounces at lists.alberg30.org on behalf of 
> > > > > public-list at lists.alberg30.org> wrote: 
> > > > > 
> > > > > Folks, 
> > > > > 
> > > > > Got tiller wobble, The metal H shaped section connecting the tiller 
> > to 
> > > > the 
> > > > > rudder head fitting does not fit as tightly as I would like. 
> Initial 
> > > > > movements of the tiller take up slack then finally start to move 
> the 
> > > > > rudder. Decided I needed to do something about this. 
> > > > > 
> > > > > Obtained two pieces of top shelf aluminum shim stock from the side 
> > of a 
> > > > > Heinekin beer car. Folded the two pieces in half. Trimmed the 
> pieces 
> > to 
> > > > > match the height of the H fitting and a similar length. Drilled a 
> > 3/8" 
> > > > hole 
> > > > > in the center of each of the two. Installed one shim on each side 
> of 
> > > the 
> > > > > rudder head fitting between the rudder head and the tiller H 
> fitting. 
> > > > > 
> > > > > Went sailing today. Comparatively NO wobble. Nice tight response. 
> > > > > Shouid have done this a while ago. Hoping that the aluminum shim 
> > stock 
> > > is 
> > > > > softer than other metals, bronze for the rudder head, and steel(?) 
> > for 
> > > > the 
> > > > > H fitting. Would be happy to replace the shim stock every year in 
> > order 
> > > > to 
> > > > > prevent wear of the other parts. 
> > > > > 
> > > > > Thoughts? Am I risking corrosion damage? 
> > > > > 
> > > > > Jonathan 
> > > > > 
> > > > > P.S. Stole the idea of using beer can shim stock from Robert 
> Pirsig's 
> > > > > _Zen_and_the_Art_of_Motorcycle_Maintenance_. Hard to believe that 
> > the 
> > > > book 
> > > > > is forty-three years old now. 
> > > > > 
> > > > > -- 
> > > > > Jonathan M Bresler 
> > > > > S/V Constance Alberg 30 #262 
> > > > > Annapolis/Eastport MD 
> > > > > _______________________________________________ 
> > > > > These businesses support your Association: 
> > > > > http://www.alberg30.org/store/A30supporters.html 
> > > > > Please support them. 
> > > > > _______________________________________________ 
> > > > > Public-List mailing list 
> > > > > Public-List at lists.alberg30.org 
> > > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > > 
> > > > > 
> > > > > 
> > > > > _______________________________________________ 
> > > > > These businesses support your Association: 
> > > > > http://www.alberg30.org/store/A30supporters.html 
> > > > > Please support them. 
> > > > > _______________________________________________ 
> > > > > Public-List mailing list 
> > > > > Public-List at lists.alberg30.org 
> > > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > > 
> > > > > _______________________________________________ 
> > > > > These businesses support your Association: 
> > > > > http://www.alberg30.org/store/A30supporters.html 
> > > > > Please support them. 
> > > > > _______________________________________________ 
> > > > > Public-List mailing list 
> > > > > Public-List at lists.alberg30.org 
> > > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > > 
> > > > _______________________________________________ 
> > > > These businesses support your Association: 
> > > > http://www.alberg30.org/store/A30supporters.html 
> > > > Please support them. 
> > > > _______________________________________________ 
> > > > Public-List mailing list 
> > > > Public-List at lists.alberg30.org 
> > > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > > 
> > > 
> > > 
> > > 
> > > -- 
> > > Jonathan M Bresler 
> > > S/V Constance Alberg 30 #262 
> > > Annapolis/Eastport MD 
> > > _______________________________________________ 
> > > These businesses support your Association: 
> > > http://www.alberg30.org/store/A30supporters.html 
> > > Please support them. 
> > > _______________________________________________ 
> > > Public-List mailing list 
> > > Public-List at lists.alberg30.org 
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > > 
> > _______________________________________________ 
> > These businesses support your Association: 
> > http://www.alberg30.org/store/A30supporters.html 
> > Please support them. 
> > _______________________________________________ 
> > Public-List mailing list 
> > Public-List at lists.alberg30.org 
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> > 
> 
> 
> 
> -- 
> Jonathan M Bresler 
> S/V Constance Alberg 30 #262 
> Annapolis/Eastport MD 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 
> _______________________________________________ 
> These businesses support your Association: 
> http://www.alberg30.org/store/A30supporters.html 
> Please support them. 
> _______________________________________________ 
> Public-List mailing list 
> Public-List at lists.alberg30.org 
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 
> 


------------------------------ 

Subject: Digest Footer 

_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 


------------------------------ 

End of Public-List Digest, Vol 3576, Issue 3 
******************************************** 

_______________________________________________ 
These businesses support your Association: 
http://www.alberg30.org/store/A30supporters.html 
Please support them. 
_______________________________________________ 
Public-List mailing list 
Public-List at lists.alberg30.org 
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org 




More information about the Public-List mailing list