[Public-List] Diesel question

[Andrew Johns via Public-List]

It very well could be.  Westerbeke uses two sensors, one for the gauge and
another for the low oil pressure alarm.

On Sun, Sep 24, 2017 at 7:26 AM, John Johnston via Public-List <
public-list at lists.alberg30.org> wrote:

> Ahoy Mates! I have a Westerbeke 20B Two in my Alberg 30. It has sat idle
> for the last ten weeks but has always run fine. She started up easily but
> when the preheat button was released the low oil alarm continued to sound.
> The oil pressure gauge showed 50 psi, raw water was pumping through the
> system, she ran smoothly. I shut it down, double-checked oil levels, all
> good, tried it again with the same result. Could this be the result of a
> failed sensor? Would welcome input or suggestions.
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>