[Public-List] Broken tack attachment

[Gordon Laco]

Hello Marcelo - 

You should be able to have this welded by a machine shop without any particular difficulty.  ‘

I forget where you are… if you are in Ontario perhaps I can direct you to a good welder.

If you have the broken piece that will make things easier…

Gordon Laco
#426 Surprise
www.gordonlaco.com




> On Aug 6, 2018, at 5:40 PM, Marcelo D. Gentinetta via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Good afternoon,
> This morning, the raised protrusion where the tack shackle is attached to the front of the boom broke off. It broke across the hole where the shackle pin passed through. This tack attachment is at the top of the large cast aluminum fitting at the front of the boom that attaches to the   circular stainless flange of the roller furler mechanism. Any ideas on how to deal with this is appreciated. 
> Marcelo
> #441
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org