[Public-List] Radio interference problems from marine LED lighting

[Dominic Amann]

I have a simple spectrum analyzer (based on a computer TV receiver USB
adapter) that I can use to check for RF interference. I am guessing that
one has to check under a variety of operating conditions (temperatures,
length of time operating etc). I will be setting up my analyzer on a
notebook to try out these LED lights as I refit.

On Thu, 23 Aug 2018 at 11:10, Stephen Gwyn via Public-List <
public-list at lists.alberg30.org> wrote:

> I definitely have that problem. If I forget to turn off the anchor light on
> the morning before I listen to the weather forecast, I have much more
> static than with the anchor light off.
>
> The problem is not the LED itself, it's the electronics that control them.
> The latest LEDs bulbs have sensors to control the current depending on the
> temperature. My old LED bulb (just LEDs) didn't have this problem.
>
> SG
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


-- 


Dominic Amann

M 416-270-4587