[Public-List] stop boom rotation

[The Rochets]

Thank you, Gordon.
Doesn’t sound too difficult.
Bernard

> On Jul 7, 2018, at 1:04 PM, public-list-request at lists.alberg30.org wrote:
> 
> Message: 4
> Date: Sat, 7 Jul 2018 06:22:24 -0400
> From: Gordon Laco <mainstay at csolve.net <mailto:mainstay at csolve.net>>
> To: Alberg 30 Public List -- open to all
> 	<public-list at lists.alberg30.org <mailto:public-list at lists.alberg30.org>>
> Subject: Re: [Public-List] stop boom rotation
> Message-ID: <03ADBD92-FA70-4694-B984-A1241A815D7F at csolve.net <mailto:03ADBD92-FA70-4694-B984-A1241A815D7F at csolve.net>>
> Content-Type: text/plain;	charset=utf-8
> 
> Good morning Bernard,
> 
> The simplest would be to drill into the worm gear assembly through it?s housing, tape threads in the bronze, then drive in a machine screw.  Ours turns a bit sometimes, but only after a really hard bash in heavy air.  I?ve not bothered to immobilize it yet but keep thinking I should?
> 
> Gordon Laco
> www.gordonlaco.com <http://www.gordonlaco.com/>
> #426 Surprise