[Public-List] Alternators...

Gordon Laco mainstay at csolve.net
Mon Jul 16 15:36:59 PDT 2018


Thanks Jonathan, it’s that curve I’m looking for.

Cheers 

Gordon Laco
www.gordonlaco.com
#426 Surprise



> On Jul 16, 2018, at 6:06 PM, Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Would suggest purchasing a DC clamp ammeter.
> The ammeter measures the current flow through a conductor.
> Bought one for Constance.  Quite useful to have.
> Allows you to know how much current the alternator is producing.
> Please note: if the batteries are fairly well charged, the alternator
> will produce less current.   Good to run all your electrical loads for
> a while, then start the engine and measure the current during the
> first minutes.
> 
> Allows you to create the curve that show what your engine
> alternator is producing.  Useful to compare over time to see if
> the values change.
> 
> Don't need a fancy (expensive) one.  Don't need precise readings,
> rather readings to within an amp or several.   Would recommend
> the Craftsman that I bought, but its been discontinued.
> 
> Jonathan
> 
> On Mon, Jul 16, 2018 at 5:21 PM, Anders Bro via Public-List <
> public-list at lists.alberg30.org> wrote:
> 
>> Yes, so multiply that rpm by the pulley ratio to come up with alternator
>> rpm, and make your own plot of output vs engine rpm?
>> 
>> On Mon, Jul 16, 2018, 4:57 PM Gordon Laco via Public-List <
>> public-list at lists.alberg30.org> wrote:
>> 
>>> True, but it’s the engine that has the RPM instrument…
>>> 
>>> Gordon Laco
>>> www.gordonlaco.com
>>> #426 Surprise
>>> 
>>> 
>>> 
>>>> On Jul 16, 2018, at 4:53 PM, Anders Bro via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> Ya, but isn't that alternator rpm and not engine speed? Usually the
>>> pulleys
>>>> are sized to have alternator rpm higher than engine rpm.
>>>> Anders
>>>> 
>>>> On Jul 16, 2018 4:39 PM, "Gordon Laco via Public-List" <
>>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> Hello friends…
>>>> 
>>>> Do any of you have data on what the output curve of our Atomic IV’s
>>>> alternators will put out at various RPM’s?
>>>> 
>>>> I’m looking at Moyer’s modern alternators, and noticed that they give
>>>> output figures for ‘normal operating speed of 2000rpm’.  Well even with
>>> the
>>>> boosted rpm our Campbell prop allows, we still don’t get more than 1500
>>>> going flat out… we cruise quietly at 1200.
>>>> 
>>>> I understand our factory supplied alternators are ’30 amp’ but what is
>> it
>>>> really delivering at real operational rpms?
>>>> 
>>>> I understand that at lower rpm’s the alternator isn’t ‘excited’ so
>>> delivers
>>>> little amperage…But I don’t know what the critical rpm rate is to
>> achieve
>>>> excitement
>>>> 
>>>> I don’t understand this whole subject as well as I’d like to.
>>>> 
>>>> Gordon Laco
>>>> #426 Surprise
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>> 
> 
> 
> 
> -- 
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org




More information about the Public-List mailing list