[Public-List] Traveller Install

[Wes Gardner]

Hi Chris, 

The one I installed isn’t Garhauer, but mine did bend to the camber of the deck without any issue. My guess is that yours will to. Use fender washers on the underside and you’ll be fine

Wes
#196

Sent from my iPhone

> On May 2, 2018, at 11:27 AM, Chris Martin via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Hi Folks
> I have a new Garhauer traveller to install and am looking for some advice. I have lots of questions and figure some have this setup and might have some pointers for installation. I found some good info in the past but I'm ready to get some hardware and didnt see that. What size and type screws/bolts did you use? Also, seems like I can fab some tapered wood pieces to mount the under the traveller or try to make the straight track bend to the deck. Not much of a curve but its there. What works? Any other issues I'm not thinking about?
> Thanks
> Chris
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org