[Public-List] Traveller Install

[Wes Gardner]

Hi Chris,

Additionally, mine is a Lewmar traveler that came with cam cleats at either
end for stopping off the traveler control line.  I bent mine up at an angle
so they are easier to get the line back into the jaws of the cam, made alot
of difference!

Wes

On Wed, May 2, 2018 at 1:50 PM, Wes Gardner <wesgardner1952 at gmail.com>
wrote:

> Hi Chris,
>
> The one I installed isn’t Garhauer, but mine did bend to the camber of the
> deck without any issue. My guess is that yours will to. Use fender washers
> on the underside and you’ll be fine
>
> Wes
> #196
>
> Sent from my iPhone
>
> > On May 2, 2018, at 11:27 AM, Chris Martin via Public-List <
> public-list at lists.alberg30.org> wrote:
> >
> > Hi Folks
> > I have a new Garhauer traveller to install and am looking for some
> advice. I have lots of questions and figure some have this setup and might
> have some pointers for installation. I found some good info in the past but
> I'm ready to get some hardware and didnt see that. What size and type
> screws/bolts did you use? Also, seems like I can fab some tapered wood
> pieces to mount the under the traveller or try to make the straight track
> bend to the deck. Not much of a curve but its there. What works? Any other
> issues I'm not thinking about?
> > Thanks
> > Chris
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>