[Public-List] Companionway Hatch

[Winslow Ayer]

How did they get it on at the yard?

Winslow

> On Aug 11, 2020, at 3:32 PM, George Dinwiddie via Public-List <public-list at lists.alberg30.org> wrote:
> 
> One thing that works is a hex screwdriver bit held with needle-nose vice grips.
> 
> - George
> 
>> On 8/11/20 12:22 PM, Richard Hansen via Public-List wrote:
>> True George.  2 screws per tab, but both tabs on one side must be removed
>> to slide/lift to the other side.  Not all offset screwdriver/wrench sets
>> are small enough to fit under the hatch.  Believe me, I bought a few with
>> great hope.  Finally found a cheap give away set from some industry
>> conference that fit.  RDH
> 
> -- 
> ----------------------------------------------------------------------
>  When I remember bygone days                         George Dinwiddie
>  I think how evening follows morn;            gdinwiddie at alberg30.org
>  So many I loved were not yet dead,           http://www.Alberg30.org
>  So many I love were not yet born.                          also see:
>               'The Middle' by Ogden Nash     http://idiacomputing.com
> ----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org