[Public-List] Public-List Digest, Vol 4016, Issue 1
Sheldon Shikoluk
shikshikoluk at gmail.com
Sun Jun 7 05:01:58 PDT 2020
Do it right! Sandblast ALL antifouling paint off, use thickened epoxy to
fill deep holes then feather sand. apply 2-3 coats of epoxy barrier coat
then 2 coats antifouling paint. Your bottom will be slick and fast. I
suspect this boat had been iced in causing the damage.
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Sat, Jun 6, 2020 at 11:11 PM <public-list-request at lists.alberg30.org>
wrote:
> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
> 1. Multiple pock marks on hull below waterline (Richard Hansen)
> 2. Re: Multiple pock marks on hull below waterline (americo silva)
> 3. Re: Multiple pock marks on hull below waterline (Tom Swift)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 6 Jun 2020 09:01:10 -0400
> From: Richard Hansen <rdhansenjr at gmail.com>
> To: public-list at lists.alberg30.org
> Subject: [Public-List] Multiple pock marks on hull below waterline
> Message-ID:
> <CAH-BX_=g=Mesp=
> kwYJpJY4UQ4ycZ6C17xLqLsx9PEvOhRFzsjw at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I have a moonscape of a gazillion small (1/4-1/2) pocks, chips, blemishes
> (whatever the right word is) on Sunspur's hull at and below the waterline
> (no blisters--she's probably way too old for that). I suspect these pocks
> have been blissfully there for decades, presumably sound under multiple
> coats of not completely removed bottom paint over the years? Now that the
> boatyard sanded those security blankets off, what do I do with this 53 year
> old hull? Can I just repaint with 2-3 coats of ablative bottom paint? Is
> some sort of universal high-build epoxy primer & barrier coat (TotalProtect
> or Gelshield or similar roll-on bottom coat) nice to have or need to have?
> Seems improbable to hand fill and sand the moonscape. Thank you for your
> advice and guidance.
> Richard Hansen
> Sun Spur #235
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 6 Jun 2020 13:11:20 -0400
> From: americo silva <picomar1957 at gmail.com>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Multiple pock marks on hull below waterline
> Message-ID:
> <CAMaMEAAfWOM1RKwgq6w0q4vhpgGgS9ico0s=
> eGiV0P9ukyNh-A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> not to old for blisters mine had them just starting and it was a great
> lakes boat
> 1966 hull # 182 ground the hull completely and put a epoxy barrier coat on
>
> On Sat, Jun 6, 2020 at 9:01 AM Richard Hansen via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I have a moonscape of a gazillion small (1/4-1/2) pocks, chips, blemishes
> > (whatever the right word is) on Sunspur's hull at and below the
> waterline
> > (no blisters--she's probably way too old for that). I suspect these
> pocks
> > have been blissfully there for decades, presumably sound under multiple
> > coats of not completely removed bottom paint over the years? Now that
> the
> > boatyard sanded those security blankets off, what do I do with this 53
> year
> > old hull? Can I just repaint with 2-3 coats of ablative bottom paint?
> Is
> > some sort of universal high-build epoxy primer & barrier coat
> (TotalProtect
> > or Gelshield or similar roll-on bottom coat) nice to have or need to
> have?
> > Seems improbable to hand fill and sand the moonscape. Thank you for your
> > advice and guidance.
> > Richard Hansen
> > Sun Spur #235
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 6 Jun 2020 14:51:25 -0400
> From: Tom Swift <swiftlaw at gmail.com>
> To: Alberg 30 Public List -- open to all
> <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Multiple pock marks on hull below waterline
> Message-ID:
> <CAMXrZcBGG9czbg_3DBg-Fx5j9ckr=pCZ--e21=vvhD=
> kyNB69Q at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I also have a 1966 hull number 2 2 2.
> Being by my very nature less precise and slightly lazy oh, I sanded down my
> blisters but did not grind. this was 5 years ago and I use Bondo to smooth
> over the blister pick marks that were most notable on or around the water
> line. Flag blue boot stripe paint and an ablative paint on her bottom. Good
> as new in and out for $125 .
>
> On Sat, Jun 6, 2020, 1:11 PM americo silva via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > not to old for blisters mine had them just starting and it was a great
> > lakes boat
> > 1966 hull # 182 ground the hull completely and put a epoxy barrier coat
> on
> >
> > On Sat, Jun 6, 2020 at 9:01 AM Richard Hansen via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > > I have a moonscape of a gazillion small (1/4-1/2) pocks, chips,
> blemishes
> > > (whatever the right word is) on Sunspur's hull at and below the
> > waterline
> > > (no blisters--she's probably way too old for that). I suspect these
> > pocks
> > > have been blissfully there for decades, presumably sound under multiple
> > > coats of not completely removed bottom paint over the years? Now that
> > the
> > > boatyard sanded those security blankets off, what do I do with this 53
> > year
> > > old hull? Can I just repaint with 2-3 coats of ablative bottom paint?
> > Is
> > > some sort of universal high-build epoxy primer & barrier coat
> > (TotalProtect
> > > or Gelshield or similar roll-on bottom coat) nice to have or need to
> > have?
> > > Seems improbable to hand fill and sand the moonscape. Thank you for
> your
> > > advice and guidance.
> > > Richard Hansen
> > > Sun Spur #235
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4016, Issue 1
> ********************************************
>
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
More information about the Public-List
mailing list