[Public-List] Exhaust iron/steel pipe thread sealant

[Michael Connolly]

George,
Thanks for the heads up.
Michael
> On 12/16/2021 7:47 PM George Dinwiddie via Public-List <public-list at lists.alberg30.org> wrote:
> 
>  
> I don't recommend teflon for exhaust systems.
> 
> "DuPont studies show that the Teflon off-gases toxic particulates at 
> 446°F. At 680°F Teflon pans release at least six toxic gases."
> 
> This is well within the range of internal combustion exhaust gasses. 
> While the cooling water might keep the pipes below that, I wouldn't bet 
> my life on that always being true.
> 
>   - George
> 
> On 12/16/21 4:12 PM, Greenhouse, Matthew A. (GSFC-6650) via Public-List 
> wrote:
> > Jonathan -- Teflon tape is fine for this and is available at any hardware store.
> > 
> > Matt
> > 
> 
> -- 
>   ----------------------------------------------------------------------
>    When I remember bygone days                         George Dinwiddie
>    I think how evening follows morn;            gdinwiddie at alberg30.org
>    So many I loved were not yet dead,           http://www.Alberg30.org
>    So many I love were not yet born.                          also see:
>                 'The Middle' by Ogden Nash     http://idiacomputing.com
>   ----------------------------------------------------------------------
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org