[Public-List] Public-List Digest, Vol 4189, Issue 2

Thu Jun 24 05:14:54 PDT 2021

In 2012 while in the east coast I had a lot of wear on the rudder shoe.
I replaced the bolt in the bottom of the rudder,cut the head off the bolt
and put 3 coats of release wax on the bolt.
I then mixed up west system with a lot of the graphite powder they have and
bolted the shoe back on. I waited a week to be sure of a full set and then
moved the rudder. This has held up since and no play in the bottom of the
rudder. Use since that repair includes a trip up the St Lawrence river.
Richard. Into The Blue.

On Wed, Jun 23, 2021 at 7:39 PM <public-list-request at lists.alberg30.org>
wrote:

> Send Public-List mailing list submissions to
>         public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
>         public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
>         public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
>    1. Re: Rudder shoe Hull 103 (Mike Lehman)
>    2. Re: Rudder shoe Hull 103 (Taft Gerry)
>    3. Re: Rudder shoe Hull 103 (David Swanson)
>    4. Re: Rudder shoe Hull 103 (Taft Gerry)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 23 Jun 2021 16:30:35 -0400
> From: Mike Lehman <mlehman at gmail.com>
> To: Alberg 30 Public List -- open to all
>         <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Rudder shoe Hull 103
> Message-ID:
>         <
> CAApdQjpkxsPpx6NLSoTNxkjSOCiQKb3TX-Yxt1nzZgJy-JTn3Q at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> I have a rudder shoe...it belongs to the A30 Association and is reserved
> for making a mold to allow duplicates to be cast, and is not for sale. On
> the other hand, I also have a mold for the rudder shoe. If anyone knows of
> a foundry that is willing to one casting at a time, I am willing to lend
> the mold provided it is returned to me since it too belongs to the A30
> Association.
>
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
>
>
>
>
> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I wonder if they came from Edson in the States as did the other castings?
> >
> > If so, and if you can motivate them to look, they?ll have the original
> > tooling in their shelves.
> >
> >
> > Gordon Laco
> > 426 Surprise
> >
> >
> >
> >
> >
> > > On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > I am looking for a rudder shoe for hull #103.  Any help is appreciated
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 23 Jun 2021 22:00:20 +0000 (UTC)
> From: Taft Gerry <gftaft at yahoo.ca>
> To: Mike Lehman via Public-List <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Rudder shoe Hull 103
> Message-ID: <1206817656.4113499.1624485620266 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
>  Thank you so much Mike.? I am in British Columbia, Canada.? I will see if
> I can find a foundry.? If not, what is the alternative?? Do you simply get
> something made out of stainless???
> I am wondering if you know where I could get the dimensions for the shoe,
> in the event I need to have one made from stainless.
>     On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
> Public-List <public-list at lists.alberg30.org> wrote:
>
>  I have a rudder shoe...it belongs to the A30 Association and is reserved
> for making a mold to allow duplicates to be cast, and is not for sale. On
> the other hand, I also have a mold for the rudder shoe. If anyone knows of
> a foundry that is willing to one casting at a time, I am willing to lend
> the mold provided it is returned to me since it too belongs to the A30
> Association.
>
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
>
>
>
>
> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I wonder if they came from Edson in the States as did the other castings?
> >
> > If so, and if you can motivate them to look, they?ll have the original
> > tooling in their shelves.
> >
> >
> > Gordon Laco
> > 426 Surprise
> >
> >
> >
> >
> >
> > > On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > I am looking for a rudder shoe for hull #103.? Any help is appreciated
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 23 Jun 2021 22:55:16 +0000 (UTC)
> From: David Swanson <zira at bellsouth.net>
> To: Taft Gerry via Public-List <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Rudder shoe Hull 103
> Message-ID: <255948444.652684.1624488916650 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
>
> Cattail Foundry
>
> Foundry in Lancaster County, PennsylvaniaAddress:?167 W Cattail Rd,
> Gordonville, PA 17529Hours:?Closed?? Opens 7AM ThuPhone:?(717) 768-7323
>
> |
> |
> |  |
> Cat Tail Foundry - Google Search
>
>
>  |
>
>  |
>
>  |
>
>
>
>
> Description
>
>
>
>     On Wednesday, June 23, 2021, 06:00:28 PM EDT, Taft Gerry via
> Public-List <public-list at lists.alberg30.org> wrote:
>
>   Thank you so much Mike.? I am in British Columbia, Canada.? I will see
> if I can find a foundry.? If not, what is the alternative?? Do you simply
> get something made out of stainless???
> I am wondering if you know where I could get the dimensions for the shoe,
> in the event I need to have one made from stainless.
> ? ? On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
> Public-List <public-list at lists.alberg30.org> wrote:?
>
>  I have a rudder shoe...it belongs to the A30 Association and is reserved
> for making a mold to allow duplicates to be cast, and is not for sale. On
> the other hand, I also have a mold for the rudder shoe. If anyone knows of
> a foundry that is willing to one casting at a time, I am willing to lend
> the mold provided it is returned to me since it too belongs to the A30
> Association.
>
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
>
>
>
>
> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I wonder if they came from Edson in the States as did the other castings?
> >
> > If so, and if you can motivate them to look, they?ll have the original
> > tooling in their shelves.
> >
> >
> > Gordon Laco
> > 426 Surprise
> >
> >
> >
> >
> >
> > > On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > I am looking for a rudder shoe for hull #103.? Any help is appreciated
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> ?
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 23 Jun 2021 23:29:25 +0000 (UTC)
> From: Taft Gerry <gftaft at yahoo.ca>
> To: David Swanson via Public-List <public-list at lists.alberg30.org>
> Subject: Re: [Public-List] Rudder shoe Hull 103
> Message-ID: <415227976.4147110.1624490965464 at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
>  Thank you so much.? I will call them tomorrow morning.
>     On Wednesday, June 23, 2021, 03:55:19 p.m. PDT, David Swanson via
> Public-List <public-list at lists.alberg30.org> wrote:
>
>
> Cattail Foundry
>
> Foundry in Lancaster County, PennsylvaniaAddress:?167 W Cattail Rd,
> Gordonville, PA 17529Hours:?Closed?? Opens 7AM ThuPhone:?(717) 768-7323
>
> |
> |
> |? |
> Cat Tail Foundry - Google Search
>
>
>  |
>
>  |
>
>  |
>
>
>
>
> Description
>
>
>
> ? ? On Wednesday, June 23, 2021, 06:00:28 PM EDT, Taft Gerry via
> Public-List <public-list at lists.alberg30.org> wrote:?
>
> ? Thank you so much Mike.? I am in British Columbia, Canada.? I will see
> if I can find a foundry.? If not, what is the alternative?? Do you simply
> get something made out of stainless???
> I am wondering if you know where I could get the dimensions for the shoe,
> in the event I need to have one made from stainless.
> ? ? On Wednesday, June 23, 2021, 01:30:50 p.m. PDT, Mike Lehman via
> Public-List <public-list at lists.alberg30.org> wrote:?
>
>  I have a rudder shoe...it belongs to the A30 Association and is reserved
> for making a mold to allow duplicates to be cast, and is not for sale. On
> the other hand, I also have a mold for the rudder shoe. If anyone knows of
> a foundry that is willing to one casting at a time, I am willing to lend
> the mold provided it is returned to me since it too belongs to the A30
> Association.
>
> Mike Lehman
> ~~~_/)_/)~~_/)~~~
>
>
>
>
> On Wed, Jun 23, 2021, 3:56 PM Gordon Laco via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> > I wonder if they came from Edson in the States as did the other castings?
> >
> > If so, and if you can motivate them to look, they?ll have the original
> > tooling in their shelves.
> >
> >
> > Gordon Laco
> > 426 Surprise
> >
> >
> >
> >
> >
> > > On Jun 23, 2021, at 3:54 PM, Taft Gerry via Public-List <
> > public-list at lists.alberg30.org> wrote:
> > >
> > > I am looking for a rudder shoe for hull #103.? Any help is appreciated
> > >
> > >
> > > _______________________________________________
> > > These businesses support your Association:
> > > http://www.alberg30.org/store/A30supporters.html
> > > Please support them.
> > > _______________________________________________
> > > Public-List mailing list
> > > Public-List at lists.alberg30.org
> > > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> ?
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> ?
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4189, Issue 2
> ********************************************
>
-- 
Richard and Margaret