[Public-List] Boat Insurance Question

Bob Norway thexaminer at gmail.com
Thu Mar 25 07:05:06 PDT 2021


That's very odd, since I just renewed my policy with BoatUS on my 1971 Alberg...


Cheers,
Bongo Bob Norway
_________________
S/V Beowulf #488
_________________
Manatee Cove Marina Website Webmaster
http://mcmpix.shutterfly.com [http://mcmpix.shutterfly.com/]
_________________
SpaceCoast Parrot Heads Club Webmaster
http://spacecoastparrotheads.com [http://spacecoastparrotheads.com/]  
______________________________
http://airforce.togetherweserved.com/profile/88355 [http://airforce.togetherweserved.com/profile/88355]
____________________

~~~~~
 Õ¿Õ¬
  ~~
   V
On 3/25/2021 09:50:32, RICHARD HAZLEGROVE via Public-List <public-list at lists.alberg30.org> wrote:
I know this question comes up from time to time but since I wasn’t in the market for insurance I unfortunately did not take note of the suggestions. Until now.

I have a very generous Agreed Value policy from Hanover Insurance ($22,000) first issued in 1998. I have never filed a claim. Yesterday I received notice of non-renewal explaining that they were exiting the line of business.

I’m not all that concerned about replacing the agreed value since I doubt it would be anywhere near what I had. Boat US first quoted $5,100 before clarifying that they don’t write this or even liability coverage for vessels older than 40 years. Quest was built in 1970 and is kept on a private dock at our second home in the lower Chesapeake Bay.

So can anyone suggest a company or agent that can underwrite basic liability coverage for my 50 year old boat. Thanks

Richard Hazlegrove
Quest 433
Mobjack Bay, VA.



> On Mar 24, 2021, at 4:05 PM, public-list-request at lists.alberg30.org wrote:
>
> Send Public-List mailing list submissions to
> public-list at lists.alberg30.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> or, via email, send a message with subject or body 'help' to
> public-list-request at lists.alberg30.org
>
> You can reach the person managing the list at
> public-list-owner at lists.alberg30.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Public-List digest..."
>
>
> Please do NOT include the entire digest in your reply!
> ======================================================
>
>
>
> Today's Topics:
>
> 1. Re: Prop Size (scott at scottmaury.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 24 Mar 2021 14:40:52 -0500
> From: scott at scottmaury.com
> To: Alberg 30 Public List -- open to all
>
> Subject: Re: [Public-List] Prop Size
> Message-ID:
> <20210324144053.Horde.DkBOojFrjFIqlYi_ChxyXk9 at gator2001.hostgator.com>
> Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes
>
> hey just a follow up, Michigan wheel has recommended that I get a 12"
> / 11 three blade prop and that is what the engine guys have ordered
> for the Bill of Rights
>
> Thank you all for your response, I'll follow up with this further
> after some use this summer.
>
> Scott
>
>
> Quoting John Johnston via Public-List :
>
>> Regarding prop size- My Alberg 30 ( # 69) spent many more months at
>> the slip this past year unattended than I had anticipated. Last
>> October I came down to the Bay from my home in Massachusetts
>> intending to spend a pleasant month sailing. It turned out that
>> while the diesel fired right up, I had no forward or reverse motion.
>> The shaft was turning, but no motion. I thought perhaps it was
>> barnacles on the prop, and I hired a diver to give it a scrape and a
>> scrub, but he resurfaced in a minute and informed me that I had no
>> prop, just a hub. Severe galvanic corrosion. The story goes on, but
>> the point is that I am looking to buy a new prop.
>> My diesel is a Westerbeke 20 2B. Not the original engine, but
>> when a previous owner installed it they kept the 2 blade prop that
>> was appropriate for the Atomic 4. I decided to upgrade to a three
>> blade Chesapeake prop at that time, (5 years ago) which was deemed
>> to be the proper, well, prop, for the new engine and transmission.
>> However, now it is time for a new prop. What I had bought was
>> a 13x12x3 from Miller Island. Lovely piece of work, but it is shot.
>> I have also been doing some research and reading, and came across an
>> article about prop size by Ted Brewer more than a decade ago, and he
>> maintains that the prop in an aperture should never have less than
>> two inches of clearance at the top of the blade, to avoid
>> cavitation. The aperture height on my Alberg is 14?. To achieve that
>> 2? would be a 10? prop, which seems awfully sleight. I am thinking
>> perhaps an 11? prop with whatever adjustment to pitch would be
>> appropriate. Or maybe 12? as a compromise.
>> I would very much welcome the wisdom of the elders, and
>> everyone else that has expertise or experience with this matter.
>> Thanks to anyone offering their experience or advice
>>
>>> On Feb 24, 2021, at 7:41 AM, Mike Meinhold via Public-List
>>> wrote:
>>>
>>> ?Scott
>>> I am glad to hear Bill of Rights will be sailing again.
>>>
>>> If you have some specs on the Vetus 25 we can see how it compares with the
>>> A4 -13x7 2-blade match that you most likely have
>>>
>>> I repowered with a beta 16 and kept the same prop as I found it was about
>>> the same operating point
>>> We would need the engine torque and power vs rpm, and the gear ratio to
>>> check.
>>>
>>> For the sails I suggest you provide the sailmaker with the Chesapeake
>>> Alberg rules in the Association handbook. I highly recommend 2 reefs and
>>> use both frequently.
>>>
>>> Mike
>>> Rinn Duin 272
>>>> On Tue, Feb 23, 2021 at 21:26 Bill of Rights #487 via Public-List <
>>>> public-list at lists.alberg30.org> wrote:
>>>>
>>>>
>>>> Hello everyone, I am a long time A30 owner and also had a Tartan 34-2
>>>> for 10 years, I just recently sold that boat.
>>>>
>>>> I'm putting all my efforts back into #487 "Bill of Rights" this year! Yea!
>>>>
>>>> I am re-powering to a 25HP Vetus engine with a 2:1 hearth gear and
>>>> just wanted to hear what others have "sized" for a 2 blade sailor prop
>>>> on other diesel conversions?
>>>>
>>>> The At-4 engine was rebuilt and has less than 10 hrs. Any interested
>>>> parties should reach out to me
>>>>
>>>> I'm also getting a new suit of sails from Precision, #400 series! Does
>>>> anyone have any experience or suggestions would be helpful Main w/ 2
>>>> reefs, 135# headsail w luff ??????????
>>>>
>>>> New interior cushions!
>>>>
>>>> Boat still has some deck issues and I'll have to fix that as I go
>>>>
>>>> Hope to catch up with like-minded a-30 sailors this summer on the bay.
>>>> I am securing a slip on the Magothy River so I'll be closer to my home
>>>> and sail some new waters this summer!
>>>>
>>>> Thanks Scott
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>>>
>>> _______________________________________________
>>> These businesses support your Association:
>>> http://www.alberg30.org/store/A30supporters.html
>>> Please support them.
>>> _______________________________________________
>>> Public-List mailing list
>>> Public-List at lists.alberg30.org
>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
>
> ------------------------------
>
> End of Public-List Digest, Vol 4139, Issue 1
> ********************************************

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org



More information about the Public-List mailing list