[Public-List] Spinnaker block location

[Michael Connolly]

Greg,
I would suspect that you might have to modify the masthead fitting with a crane to move the halyard bock further forward of the stay for the furler.
Michael
> On 12/01/2022 1:48 PM Greg Hounsell via Public-List <public-list at lists.alberg30.org> wrote:
> 
>  
> Afternoon all;
> 
> Have not flown the assym yet but did rig up the halyard this year. The
> issue I'm having is that with the halyard block at the front of the
> masthead piece, it is just above the furler by a few inches.
> 
> Where and how do people store the halyard when not in use? I found each end
> had to be pulled aft and tied to the bottom of the upper shrouds so they
> wouldn't rub/wrap on the furler.
> 
> Is a pic needed ?
> 
> Greg
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org