[Public-List] Sanding the reverse (concave) curve where the keel and hull meet

[Michael Connolly]

Jonathan,
Use your current sander at about a 45 degree angle to the concave surface. Apply only light pressure. It will work fine, takes some practice. Keep it moving at all times.
Michael
> On 02/06/2022 8:53 AM Jonathan Bresler via Public-List <public-list at lists.alberg30.org> wrote:
> 
>  
> Folks,
> 
> When sanding the hull to remove old paint, how do you sand the reverse
> (concave) curve where the keel meets the hull of an Alberg 30?
> Currently using a 5" DA sander to remove paint from the hull and keel. The
> sander does not fit into the reverse curve.
> 
> All the best,
> Jonathan
> 
> -- 
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org