[Public-List] Shaft log, cutlass bearing housing replacement.

[Jonathan Bresler]

David,

Dont know if James Baldin (atomvoyages on YouTube who rebuilds boats)
has done a video on this.  That would be a good place to look.

Good Old Boat has two good DIY articles on how to repair a broken stern
tube
(Issue 109, Jul/Aug 2016 and Issue 28, Jan/Feb 2003)

Another place is the work that Lackey Sailing does.  His replacement on an
Alberg is documented over parts of several web pages

   -
   - about half way down
   http://www.lackeysailing.com/archived/hattiemae/june09/62209.htm
   - bottom paragraphs of
   http://www.lackeysailing.com/archived/hattiemae/june09/62309.htm
   - first half of
   http://www.lackeysailing.com/archived/hattiemae/june09/62409.htm
   - middle of
   http://www.lackeysailing.com/archived/hattiemae/june09/63009.htm
   - lower portion of
   http://www.lackeysailing.com/archived/hattiemae/july09/70209.htm
   - top half of
   http://www.lackeysailing.com/archived/hattiemae/july09/70309.htm



On Mon, Jun 13, 2022 at 12:19 PM David A. Bardsley via Public-List <
public-list at lists.alberg30.org> wrote:

>    Hello all!
>    I'm was in the process of replacing the cutlass bearing and after
>    pulling the shaft log assembly and inspecting it have decided to
>    replace the whole kit and kaboodle.
>    Are there any suggestions for a complete replacement kit?
>    I apologize in advance in case this question has been answered a dozen
>    times already.
>    Dave
>    Ginseng #574
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>


-- 
Jonathan M Bresler
S/V Constance Alberg 30 #262
Annapolis/Eastport MD