[Public-List] Nut splitters

[Kris Coward]

A Dremel tool is a lot likelier to cut into the threads of the bolt/stud/rod that the nut is threaded on, so if you apply that fix often enough, you'll also have to replace said bolt/stud/rod (which will inevitably turn out to be awkwardly situated, and seized in something else for good measure)

-Kris

-- 
Kris Coward
https://unripe.melon.org/


------- Original Message -------
On Wednesday, July 5th, 2023 at 16:40, Jim Davis via Public-List <public-list at lists.alberg30.org> wrote:


> For something as small at these nuts has anyone considered a Dremel tool with a one inch diameter cut off wheel. Then go to the hardware store and buy a complete set of new machine screws and nuts.
> 
> 
> Jim Davis
> Prairie Schooner
> Meddle not in the affairs of dragons, for you are crunchy, and taste good with ketchup.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org