[Public-List] whale pump update

[Michael]

You want to reassemble in a way that the next time disassembly is 
required, it is as easy as possible. Nev-R-Seize everything, including 
the inside of the hoses where they slide onto the pump.
Michael Grosh
#220


------ Original Message ------
>From "David Terrell via Public-List" <public-list at lists.alberg30.org>
To "public-list at lists.alberg30.org" <public-list at lists.alberg30.org>
Cc dterrell1 at charter.net
Date 7/10/2023 3:52:47 AM
Subject [Public-List] whale pump update

>the last nut has been removed. It was a stop nut and the bolt was
>turning. I think a previous owner put the stop nut on because the bolt
>was turning. had he used a lock washer and regular nut, this would not
>have been such a problem. once the nut was removed, it was easy to
>disconnect from the bolts
>In any case, is it possible to change the valves in the whale pump
>with only one hose disconnected ? or do I have to disconnect both
>hoses and remove the pump to work on it and then reassemble the whole
>system.
>Your thoughts????
>David 432
>_______________________________________________
>These businesses support your Association:
>http://www.alberg30.org/store/A30supporters.html
>Please support them.
>_______________________________________________
>Public-List mailing list
>Public-List at lists.alberg30.org
>http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org