[Public-List] Sealing coaming boards to the deck

[gdinwiddie at alberg30.org]

On the advice of Bud Dolber, I used neoprene gasket material. Sometimes 
you may be able to get "scrap" offcuts from an industrial gasket supply 
house. That was so long ago, I found them in the yellow pages.

  - George

On 6/17/23 2:05 PM, Jay Davenport via Public-List wrote:
> Greg,
> Thin foam strips, as you described, work well. If it has peel-off adhesive on one side, it is easy to position where you want it. The big advantage is that the coaming boards are thereafter easy to remove and replace when painting or staining is needed.
> Jay  Revolution, A30 #526
> 
> 
>   
> 
>      On Saturday, June 17, 2023 at 01:46:39 PM EDT, Greg via Public-List <public-list at lists.alberg30.org> wrote:
>   
>   Hi Folks,Is it standard practice to seal the coaming boards to the deck? Is so what works well? I'm thinking some 1/8" or 1/16" epdm foam strips might do the trick.Regards,GregS/V Ayla
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>    
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.                          also see:
                'The Middle' by Ogden Nash     http://idiacomputing.com
  ----------------------------------------------------------------------