[Public-List] Isspro guages and senders

[Winslow Ayer]

That's the same as mine.


> On Sep 11, 2023, at 7:04 PM, Marcelo D. Gentinetta via Public-List <public-list at lists.alberg30.org> wrote:
> 
> On mine, the oil pressure sender is located on the right side of the engine facing aft just behind the flywheel housing and in front of the carburetor. It attaches to the block via a short brass nipple. 
> 
> Marcelo Gentinetta
> #441 Alegria
> 
>> On Sep 11, 2023, at 2:19 PM, David Terrell via Public-List <public-list at lists.alberg30.org> wrote:
>> 
>>  I recently purchased an oil pressure gauge and sender from Moyer as I
>>  was having some problems with getting correct readings. When I spoke
>>  with Ken at Moyer he told me that the pressure sender needed to
>>  attached to the left side of the atomic 4 engine - that is as you face
>>  aft in the boat.
>> 
>>  I have investigated this option and it looks like it is difficult or
>>  impossible to do this given where the Atomic 4 is in my boat.
>> 
>>  So, is there anyone with an Atomic 4 that has has successfully done
>>  this and if so, how did they do it?????
>> 
>>  David  432
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org