[Public-List] more tiller-to-rudder

Sat Mar 30 15:24:34 PDT 2024

Stephen -- The fender washers don't wear into the bronze or the teak, as they spread the force over a large area. They just work forever.

Friendship 295

-----Original Message-----
From: Public-List <public-list-bounces at lists.alberg30.org> On Behalf Of public-list-request at lists.alberg30.org
Sent: Saturday, March 30, 2024 4:08 PM
To: public-list at lists.alberg30.org
Subject: [EXTERNAL] [BULK] Public-List Digest, Vol 4480, Issue 1

CAUTION: This email originated from outside of NASA.  Please take care when clicking links or opening attachments.  Use the "Report Message" button to report suspicious messages to the NASA SOC.

Send Public-List mailing list submissions to
        public-list at lists.alberg30.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
or, via email, send a message with subject or body 'help' to
        public-list-request at lists.alberg30.org

You can reach the person managing the list at
        public-list-owner at lists.alberg30.org

When replying, please edit your Subject line so it is more specific than "Re: Contents of Public-List digest..."

Please do NOT include the entire digest in your reply!
======================================================

Today's Topics:

   1. Re: Tiller to Rudder Connection (Stephen Gwyn)

----------------------------------------------------------------------

Message: 1
Date: Fri, 29 Mar 2024 18:58:25 -0400
From: Stephen Gwyn <stephen.gwyn at gmail.com>
To: Alberg 30 Public List -- open to all
        <public-list at lists.alberg30.org>
Subject: Re: [Public-List] Tiller to Rudder Connection
Message-ID:
        <CANkDF7b20PoJEtLX-cNNn-fEk8FkphXPkhhQ3AJJeu-kF9_YAw at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Matt has reminded me of the other thing I tried, which is shimming. I tried stainless washers, but they were too hard and wore into the bronze. I tried plastic washers, but they were too soft and didn't last long. Then I made copper washers cut from a thin sheet. They worked the best. They lasted a year before wearing out, but didn't cut into the surrounding bronze.

Stephen

------------------------------

Subject: Digest Footer

_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

------------------------------

End of Public-List Digest, Vol 4480, Issue 1
********************************************