[alberg30] Tiller play (was New Forhatch)

George Dinwiddie gdinwiddie at min.net
Fri Jun 26 08:55:53 PDT 1998


From: George Dinwiddie <gdinwiddie at min.net>

> FINNUS505 at aol.com said:
> 
> There is some play in the tiller gooseneck, and I have not gotten to exploring
> it yet. I hope it is not a significant problem. 

This is a common problem.  I replace my rudder post head a couple
years ago, but the new one is already got some play.  The top view
of the rudder post looks like this:


	     -------------------------- "ears"
	    /           /
	    |           |
            V           V

	 __ __          __ __
	 || ||          || ||
	 -- --          -- --  -|
      ========================| |  <--- bolt 'A'
	 -- --          -- --  -|
	 || ||__________|| ||
	 || |            | ||
	 || |        <----------------- fitting on end of rudder post
	 ||  \          /  ||
	 | \  \        /  / |
	 |  \  --------  /  |
	 |   ------------   |
	 |                  | <-------- tiller yoke
	 |   ------------   |
	 |  | ---------- |  |
	 |  ||          ||  |
	 |  ||          ||  |
	 ---  ----------  --   -|
      ========================| |  <--- tiller bolt
	 ---  ----------  --   -|
	 |  ||          ||  |
	 |  ||          ||  |
	 |  ||       <----------------- tiller
	 |  ||          ||  |
	 |  ||          ||  |
	 ---  ----------  --   -|
      ========================| |  <--- tiller bolt
	 ---  ----------  --   -|
	 |  ||          ||  |
	  -- |          | --
	     |          |
	     |          |
	     |          |
	     |          |
	     |/\/\/\/\/\|

The problem is that the ears on the tiller head get compressed
toward each other.  Tightening bolt 'A' through them helps only
temporarily and increases the problem.  What's needed (in my
opinion) is a bushing between the ears.  

Does anyone know a source of bronze or stainless tubing?  It
has to have an inside diameter large enough for the bolt,
5/16" if I remember correctly, and relatively thick walls.

 - George





-- 
 ----------------------------------------------------------------------
  George Dinwiddie                                  gdinwiddie at min.net
  The gods do not deduct from man's allotted span those hours spent in
  sailing.          http://ourworld.compuserve.com/homepages/Alberg30/
 ----------------------------------------------------------------------


------------------------------------------------------------------------
Help support ONElist, while generating interest in your product or
service. ONElist has a variety of advertising packages. Visit
http://www.onelist.com/advert.html for more information.

 898876553.0


More information about the Public-List mailing list