[alberg30] A30 hatch

Harlan M. Doliner gorwin at flash.net
Sun Nov 7 20:00:24 PST 1999


From: "Harlan M. Doliner" <gorwin at flash.net>

Hello,  On Friday we hauled our A30 for the first time and had it set up
on blocks and stands at our house.  After being in and out of the boat
several times Friday and Saturday with no problem, today (Sunday) I had
a heck of a time sliding the main hatch over the companionway open and
closed.  The edge of the opening in the fiberglass cabin top is rubbing
against the wood veneer on the top of the hatch.  We never had this
happen when the boat was in the water or on stands before we bought and
launched her this summer.  Today and tonight has been in the 30s and 40s
F. Could the colder temps and varying contractions of wood vs.
fiberglass be the clause?  Whether or not it is, any suggestions for a
cure?  I'd hate to see the original hatch wood rubbed off every time we
open & close the hatch while we work on the boat this fall and winter.  
Thanks much.  Harlan Doliner, , Evergreen #489

--------------------------- ONElist Sponsor ----------------------------

    GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
  <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>

------------------------------------------------------------------------

 942033624.0


More information about the Public-List mailing list