[alberg30] Fire back in 1 and2

David Swanson zira at mindspring.com
Mon Sep 27 17:03:42 PDT 1999


From: David Swanson <zira at mindspring.com>

Jack -

It is very simple to replace the pump.  The usual replacement is an Oberdorfer
202M7.  Cost is usually a little over $100.    You just un-bolt the old pump &
bolt on the new one.  I usually take my pump off to replace the impeller, that
way I don't drop the little screws in to the bilge.

You might want to take the old pump & try to fix the leak before scrapping it.
Usually, it leaks around the little drain screw in the bottom, or where the
pump bolts to the engine.  A new gasket will often fix either one.

Good luck.

dls

jack at abs.net wrote:

> From: jack at abs.net
>
> Problem with Annabelle(#453)< was blown gasket between 1 and 2. Replaced it
> with grathite one ,and only one which replaces the 2 previous recommended
> gaskets. The water pump is leaking about 3 drps per second, and would
> like to replace the pump. Is this as difficult as it looks?
>                                                  Jack
>
> 

--------------------------- ONElist Sponsor ----------------------------

Share your special moments with family and friends- send PHOTO Greetings
at Zing.com! Use your own photos or choose from a variety of funny,
                 cute, cool and animated cards.       
   <a href=" http://clickme.onelist.com/ad/zing14 ">Click Here</a>

------------------------------------------------------------------------

 938477022.0


More information about the Public-List mailing list