[Alberg30] Notes on installing A-30 mast brace

sousa, stephen sousa_stephen at emc.com
Tue May 1 07:17:43 PDT 2001


Dan and the Alberg Team.

I received the plates yesterday  afternoon which will be installed in #114. 
Dan, I appreciate the suggestion of spacing which may be effected by heat
and cold. During the installation process did anyone upgrade the bolt size,
the original bolts seem very light for this application?

Stephen 
#114 



-----Original Message-----
From: Daniel Sternglass [mailto:dans at stmktg.com]
Sent: Tuesday, May 01, 2001 8:53 AM
To: public-list at alberg30.org
Subject: [Alberg30] Notes on installing A-30 mast brace


dickdurk wrote:
> 
> I'm in the process now of fitting the plates to the mainbeam...

One important detail about fitting is to make sure that there is about
1/8" clearance between the top of the brace and the roof, so thatthe
deck will not get cracks in it when the beam is under maximum
compression. I have heard of people who put the braces too close to the
"ceiling" and ended up with small cracks inthe deck over time. We
installed ours with the mast off (no load), so the gap is allthe more
important under that condition.

Also, if you are jacking up the support, be sure to open up the cabin
sole floor hatches and use a 4 x4 or other wood so you jack against the
structual top of the keel. Do -not- jack against the floor, you risk
damaging it.

--Dan S.
dans at stmktg.com
Watcher of the Skies, #201, 1966, Cayuga Lake, Ithaca, NY
 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.
 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 988726663.0


More information about the Public-List mailing list