[Alberg30] Rigging tension

[Gord Laco]

Good for you Tom,

Bolting the plates on the bottom in order to hold the old laminations
together is foolish, can only serve cosmetic objective.

Gord KC426 Surprise

----- Original Message -----
From: <SwiftLaw at aol.com>
To: <public-list at alberg30.org>
Sent: Tuesday, May 08, 2001 10:59 AM
Subject: [Alberg30] Rigging tension


> I believe that Mike Lehman was going to post his recommendations for
rigging
> tension.
> Did I miss it?
>
> FYI- I had the dispute with Yard Boss and as a result of this list, have
> taken the project away from them and now await my aluminum plates from
> Washington Aluminum Company. Expect more questions! Thanks again.
> Tom Swift #222
>  +-----------------------------------------------------------+
>  |       Shop SailNet for your Spring outfitting needs.      |
>  | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
>  +-----------------------------------------------------------+
>
> _______________________________________________
> Public-list mailing list -- Public-list at alberg30.org
> http://www.alberg30.org/mailman/listinfo/public-list
> To unsubscribe: email to Public-list-request at alberg30.org
> Include command "unsubscribe <password>" in subject or body.
> Use command "help" for more options.
>
>

 +-----------------------------------------------------------+
 |       Shop SailNet for your Spring outfitting needs.      |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+

_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 989347038.0