[Alberg30] removing chainplates?

George Dinwiddie gdinwiddie at min.net
Wed Apr 10 10:48:04 PDT 2002


Get the best bit you can find.  I used what I could find locally,
and it wasn't really adequate.

I used the Dewalt cordless drill at low speed.  If you can use
a drill press, that's infinitely better.

 - George

> Tom Sutherland said:
> 
> Thanks George for this info. I will plan to do as you did while my mast
> is down. Do you think it would be worth while to invest in a 5/16"
> carbide bit? Do you have a recommended drill speed for drilling these
> holes out in these SS chainplates. It is my understanding that the SS
> will "work harden" if you do not keep the bit cutting.

-- 
 ----------------------------------------------------------------------
  George Dinwiddie                             gdinwiddie at alberg30.org
  The gods do not deduct from man's allotted span those hours spent in
  sailing.                                    http://www.Alberg30.org/
 ----------------------------------------------------------------------

 +-----------------------------------------------------------+
 | ** Skymate Windmeter $18.00 off! Product code JDCSM-18 ** |
 | http://www.myaffiliateprogram.com/u/sailnet/t.asp?id=1066 |
 +-----------------------------------------------------------+


_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1018460884.0


More information about the Public-List mailing list