[Alberg30] Mast electrical connectors

[Brian Zinser]

For the antenna and I suppose it would work with electrical, I prefer
the cable clam fittings since there is no break/connection in the coax
and the fitting is watertight if installed properly.  I thing you can
get them at West Marine and Sailnet.
 
Brian
#134 Manana
 
-----Original Message-----
From: public-list-admin at alberg30.org
[mailto:public-list-admin at alberg30.org] On Behalf Of RGStreit at aol.com
Sent: Tuesday, June 11, 2002 1:58 PM
To: public-list at alberg30.org
Subject: [Alberg30] Mast electrical connectors
 
When I purchased #253 last summer the former owner had removed the
electrical and antennae connectors from the cabin top and had run the
wires through the head vent. Apparently this was done because of leaking
problems. While this arrangement works,  it isn't to pretty and does
create a tripping danger on the deck with the wires running from the
mast to the vent. I'm looking for suggestions on the best connectors on
the market as I want to install them  in the cabin top at the base of
the mast.  Specific products and  part numbers would be helpful if
anyone has them. Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alberg30.org/pipermail/public-list-alberg30.org/attachments/20020611/01d2f008/attachment-0004.htm>