[Alberg30] engine pan

J Bergquist j at ship.saic.com
Fri Jan 10 14:27:29 PST 2003


Okay I got another question...

Another thing I want to do is install a drip pan beneath my engine (I do 
not have a hull liner). Right now, the engine leaks a little oil from 
the rear seal. I am going to pull it out and fix the seal in February. 
When I do that, I want to install a drip pan beneath it so that I can 
make sure that nothing falls from the engine into the bilge (I like my 
bilges very very clean, as I expect most people do...) Has anybody done 
this? Currently, I am thinking to just epoxy/glass 4 blocks of hardwood 
to the hull, then drill holes in them and bolt a piece of 1/2" plywood, 
cut to shape, to fit there beneath the engine. I will waterproof the 
plywood and then put an oil-dry pad on top of it. I figure this should 
help me keep my bilges clean. Any recommendations or ideas?

Thanks!

J Bergquist
Calliope #287
_______________________________________________

Looking for a hard-to-find or out-of-print book?  Or just any book, but 
looking for a good deal on a used book?  Check the Advanced Book Exchange,
one of my personal favorite online stores!
http://alberg30.org/store/AbeBooks.html
_______________________________________________
Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1042237649.0


More information about the Public-List mailing list