[Alberg30] Coamings

[sousa, stephen (ENG)]

James,

The coamings should can be removed as follows. 

Remove screws and nuts holding the winch bases to the coamings.
Remove a nut inside the cabin that hold the coaming and spacer to the hull.
Then remove a number 1/4 x 20 bolts holding the coaming to the hull, the
moldings are screwed to the coamings and are removed as one piece.

Stephen  

-----Original Message-----
From: James Schueler [mailto:jschueler at familyempowerment.org] 
Sent: Friday, October 17, 2003 8:42 AM
To: public-list at alberg30.org
Subject: [Alberg30] Coamings


Hi there.
 
Does anyone have experience with removing the coamings. I'm not happy with
the way the sanding is going and there are some areas that I can't get to.
In order to make it come out as I would like I'm thinking of removing the
coamings but would like to know what to expect. In preparation for painting
the deck most of the hardware has been removed so the removal would be a
benefit in that area also.
 
Thanks,
 
James  +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
+---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org Include command
"unsubscribe <password>" in subject or body. Use command "help" for more
options.
 +---------------------------------------------------------------+
 |                This Old Boat by Don Casey                     |
 | http://www.amazon.com/exec/obidos/ASIN/0071579931/alberg30-20 |
 +---------------------------------------------------------------+

Public-list mailing list -- Public-list at alberg30.org
http://www.alberg30.org/mailman/listinfo/public-list
To unsubscribe: email to Public-list-request at alberg30.org
Include command "unsubscribe <password>" in subject or body.
Use command "help" for more options.

 1066396301.0