[Public-list] thru hulls and seacocks and ball valves

[sousa, stephen (ENG)]

Dan,

For those boats made in the 80s and up I would agree due to the hull
thickness. Also 1/2 inch are in production, call Buck and ask who they have
for distributors in your area. You can also buy them on-line from Hamilton
or another large outfit.

Stephen

-----Original Message-----
From: public-list-bounces at alberg30.org
[mailto:public-list-bounces at alberg30.org] On Behalf Of dan walker
Sent: Friday, July 16, 2004 6:15 PM
To: Alberg 30 Public List -- open to all
Subject: [Public-list] thru hulls and seacocks and ball valves


well i went to my local handy dandy west store and the chap says i shold not
put in ball valves, i should put in seacocks. everybody agree and think this
is necessary? also dont seem to carry half inch seacocks. only three quarte
so i would need to change all the half inch thru hulls to 3 quartetr. oh the
despair\
 
thanks 
dan

		
---------------------------------
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
_______________________________________________
Public-list mailing list
Public-list at alberg30.org http://alberg30.org/mailman/listinfo/public-list

 1090020305.0