[Public-list] thru hulls

Mike Lehman sail_505 at hotmail.com
Tue Jul 13 18:59:14 PDT 2004


If you have gate valves...replace them

If the suspect thru hull is 1/2" and original...replace it

If the thru hull fitting turns...replace it or re-bed it

Otherwise, buy a big bilge pump.


----- Original Message ----- 
From: "Daniel Walker" <DWalker at cemcocpa.com>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Tuesday, July 13, 2004 11:27 AM
Subject: [Public-list] thru hulls


as a firm believer in "if it ain't broke, don't fix it". , i violated that 
rule after three years of hearing REPLACE THE GATE VALVES.
so, it was midnight and dark and as i turn a gate valve with my handy dandy 
pipe wrench, and notice the thru hull turning. in the dark it doesn't appear 
broken, but would this be a candidate for the whitby do it yourself thru 
hull fitting that all advise to replace?
dan
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list 

 1089770354.0


More information about the Public-List mailing list