[Public-list] thru hulls

[Brian and Elaine Timmins]

  A few years back, when I did the ones on 497, it was only the small ones,
and there was only one washer. You can easily tell the difference between
the "real" ones and Whitby's "home made" ones.
  Does it look like a washer with a peened over pipe sticking in the middle?
Change it!
Regards,
Brian ex#497
----- Original Message ----- 
From: "Daniel Walker" <DWalker at cemcocpa.com>
To: "Alberg 30 public list" <public-list at alberg30.org>
Sent: Wednesday, July 14, 2004 10:47 AM
Subject: [Public-list] thru hulls


> well, i have removed my first thru hull. as usual, it was dark, so the
question, did whitby only have one washer on the outside of the hull, or is
there a possibility of one hiding somehow under caulk etc. also, in the 1998
alberg 30 edition of the maintenance manual it states the small thru hulls
need to be replaced. does that mean whitby used "real" thru hulls for the
larger diameter and i don't need to worry about changing them?
> thanks in advance
> dan
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list


 1089970505.0