[Public-list] winch handle for original mast winch

John Irving a30blueteal at gmail.com
Wed Nov 3 17:32:12 PST 2004


I've got one right here. 

Shaft length:  285 mm (about 11 1/4")
Shaft width at base: 36 mm (1 7/16")
Shaft tapers to width at handle: 31 mm (1 1/8")
Handle length: 95 mm (3 11/16")
Handle width at attachment to handle: 31 mm (1 1/8")
Handle tapers to width at top: 35 mm (1 3/8")

Good luck!

John


On Wed, 03 Nov 2004 20:06:59 -0500, Brian and Elaine Timmins
<timmins at optonline.net> wrote:
> Difficult maybe, irreplaceable? No.
> You'll need the dimensions of the old handle (tough to get I guess) or the
> dimensions of the slot in the winch. Post them to the group, and check any
> consignment / used gear stores near you. Are you in or near Annapolis? Try
> Bacon's.
> Good Luck,
> Brian   ex#497
> 
> 
> > >
> > > I am crewing on an Alberg 30 whose main halyard uses one of the original
> > > winches located
> > > on the mast itself. While raising the main the other day the winch
> handle, old
> > > but
> > > hopefully not irriplacable, flew out of its pocket and into the sea.
> Does
> > > anyone know of
> > > anyway I can replace this for my captain???
> > >
> 
> _______________________________________________
> Public-list mailing list
> Public-list at alberg30.org
> http://alberg30.org/mailman/listinfo/public-list
>

 1099531932.0


More information about the Public-List mailing list