[Public-list] Lexan or Acrylic ?
gdinwiddie at alberg30.org
Thu Sep 30 09:31:54 PDT 2004
??? I didn't mention butyl rubber.
Are you talking about a butyl gasket? I've used butyl rubber caulk,
before (not on the boat), and it's about the messiest stuff I've ever
experienced. It's worse than 5200 for getting on everything.
On Thu, Sep 30, 2004 at 07:50:15AM -0400, sousa, stephen (ENG) wrote:
> Great job in documenting the port replacement. At the end of this document
> you mention butyl rubber as an alternative, this is product we used and it
> worked well. This application eliminated any sealant from being pushed out
> onto the lexan and you can snug up the screws immediately. Also this product
> is generally available from any good glass shop in your area.
> -----Original Message-----
> From: public-list-bounces at alberg30.org
> [mailto:public-list-bounces at alberg30.org] On Behalf Of George Dinwiddie
> Sent: Wednesday, September 29, 2004 10:48 PM
> To: sutherlandt at prodigy.net; Alberg 30 Public List -- open to all
> Subject: Re: [Public-list] Lexan or Acrylic ?
> It's done. See http://alberg30.org/maintenance/HullDeck/Portlights/
> Tom Sutherland wrote:
> > That would great George ... I am sure it would be of great interest
> > for those of us out here in the hinterlands.
> > tom s
> > A30 412
> > George Dinwiddie wrote:
> >>One of these days I'll write up the portlight replacement we did at
> >>the Spring Maintenance Rendezvous.
More information about the Public-List