[Public-list] bow roller for cqr anchor

[David Terrell]

I will measure it tomorrow and reply. It is substantially backed up on
the underside of the deck as well.

>>> George Dinwiddie <gdinwiddie at alberg30.org> 08/08/06 7:18 PM >>>
David Terrell wrote:
> I am quite sure it was AR-30. It is 24 " long  and has a 2.5" ID. If
you
> call them @ 909-985-9993 and ask for Mark, he will give you excellent
> guidance. Like all Garhauer's products is very strongly built. 
> 
>>>> "andymshaw at juno.com" <andymshaw at juno.com> 08/07/06 4:31 PM >>>
> David,
> Dou know the model # of the one you used?
> Thanks,
> Andy    #477
> 
> 
> -- "David Terrell" <DTERRELL at message.nmc.edu> wrote:
> I purchased a bow roller from Garhauer and mounted it on the bow. It
> was
> a pretty simple job.  I did not add a bow sprit as some have done. I
> will take a picture of it when I go to the boat this afternoon and
> attempt to post it tomorrow.

David, do you have the dimensions of the block under the roller?

(The pictures are posted at 
http://alberg30.org/maintenance/disorganized/bowroller/DavidTerrell/)

  - George

-- 
  ----------------------------------------------------------------------
   When I remember bygone days                         George Dinwiddie
   I think how evening follows morn;            gdinwiddie at alberg30.org
   So many I loved were not yet dead,           http://www.Alberg30.org
   So many I love were not yet born.
                'The Middle' by Ogden Nash
  ----------------------------------------------------------------------



_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-list mailing list
Public-list at alberg30.org
http://alberg30.org/mailman/listinfo/public-list


 1155091264.0