[Public-List] Standpipe exhaust

[John Birch]

$800 is not unreasonable for silicon bronze, I had a similar quote up here 
in Canada.

best

John

----- Original Message ----- 
From: "James Allocco" <jamesallocco at gmail.com>
To: <public-list at lists.alberg30.org>
Sent: Friday, December 11, 2009 9:37 PM
Subject: [Public-List] Standpipe exhaust


> hello everyone,
>
> I have not taken part in the mailing list for several years and it feels
> very good to be back. I have a '74 alberg30, # 565 Barchetta Mia.  The
> original standpipe corroded  20 years ago and was replaced with a 
> stainless
> steel standpipe.  Last year it developed an external leak at the bottom of
> the pipe and was ground out and rewelded. I am concerned that the internal
> pipe may be deteriorated as well so I  think It to have a new exhaust
> fabricated.
>
> I am uncertain of the internal workings and dimensions. Does anyone have
> dimensions for the internal pipe diameter and length and cap design ? 
> Last
> year the welder who repaired the exhaust said he was familiar with the
> design and could fabricate a new one for $800 . That seams pricey. In any
> event he is no longer in the area and my alternative would be to cut it 
> open
> to measure it.
>
> Any advice would be greatly appreciated.
>
> Thanks,
> Jim allocco
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> 



 1260597542.0