[Public-List] Yanmar 2GM Starting Current

[Stephen s]

Greg,

 

I used 00 battery cables on the Yanmar and house side. The question on fuses, I would give Torrenson Marine a call and speak to Chris in Parts or the Service People. I replaced the entire wiring harness which had an in line fuse they should be able to provide the spec.

 

Stephen

#114   
 
> Date: Wed, 16 Dec 2009 10:53:16 -0800
> From: gregr at nethere.com
> To: public-list at lists.alberg30.org
> Subject: [Public-List] Yanmar 2GM Starting Current
> 
> I'm in the middle of the joyous job of rewiring and need to size my battery
> cables and battery fuses.(I'm a bit sick in the head as I actually do like
> doing the electrical) The Yanmar starter is rated at 1kW so at 12V that's
> about 85 Amps. The guy at West suggested 150A for the fuses which seems
> reasonable.
> 
> What currents have people been designing for?
> Where are batteries being stowed?
> 
> As always, Thanks for all the help with my continuing refit!
> 
> Greg
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
 1261003773.0