[Public-List] Whale Gusher 10

[Kris Coward]

I have a similar layer of water, and am regualrly tempted to stick a
nice strum box on the bilge end of my hose and see if that could help
make it go away..

Cheers,
Kris

On Mon, Apr 18, 2011 at 02:44:28PM +0000, jimcherry at sympatico.ca wrote:
> 
> Heres my pump story...........I know this sounds pretty obvious ... and I should have been able to figure it out....but no one has ever accused me of being a rocket surgeon before,....and I've made a few classic mistakes, including this one.....
> When I first bought my boat I was testing the manual bilge pump....it made all the appropriate bilge pump noises,.... but no matter how furiously I worked the handle, it wouldn't move the H2O from the bilge to the river. 
> To make a very loong and frustrating story, short, I simply hadn't filled the bilge with enough water for the bilge intake hose to have anything to suck. Although the hose was located as close as it could be to the bottom of the bilge, it was still a 1" diameter hose and as soon as the water got lower than 1", it would just suck air ( and make bilge pump noises). The bilge still "looked' full of water to me down there in the dark.
> The pump was working fine ....the problem was somewhere 'north of the pump handle"..... 
>  
>  
>  
> 
>  
> > Date: Mon, 18 Apr 2011 06:46:15 -0700
> > From: notcmartin at yahoo.com
> > To: public-list at lists.alberg30.org
> > Subject: [Public-List] Whale Gusher 10
> > 
> > Hello All
> > 
> > My bilge pump didnt want to pump so ordered the rebuild kit and hoped for the 
> > best. New bits are installed and still no pumping. I found a stripped hole and 
> > some corrosion around the seals in the pump housing, I assume it's sucking air 
> > and cant prime. Does anyone have an old pump or pump housing in good shape they 
> > want to get out of the garage? 
> > 
> > 
> > Before I order a new one, any other models to consider?
> > 
> > Thanks
> > 
> > Chris
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>  		 	   		  
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

-- 
Kris Coward					http://unripe.melon.org/
GPG Fingerprint: 2BF3 957D 310A FEEC 4733  830E 21A4 05C7 1FEB 12B3

 1303138303.0