[Public-List] Cockpit Coamings

[Glennb]

Hello Bob,

I used Dolphinite when I refinished my cockpit coamings last spring. Also made up some teak quarter round to cover the deck to coaming joint on the outer deck side of the coaming.

Glenn
Dolce 318

Sent from my iPad

On Jun 22, 2013, at 4:14 AM, "Bob Crinion" <bob at crinion.ca> wrote:

> I removed the Cockpit Coamings to paint the deck.
> 
> The teak had "some black stuff" applied at the factory on the back of
> the teak which I removed.
> 
> The teak was  totally stripped and System 3 epoxy sealer applied (soaks
> in like lacquer thinner) with several coats of Cetol applied afterwards.
> 
> 
> 
> What suggestions should I use to "rebed" the team coamings back in place
> in the cockpit?
> 
> 
> 
> Thanks,
> 
> -bob
> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org

 1371922600.0