[Public-List] Re-bedding cockpit coamings

j t wittbold johnnywittbold at mac.com
Mon Mar 24 10:34:00 PDT 2014


I too am interested in this question.
I think some owners have also opted to not bed the coamings in anything and leave an air gap.
Pros and cons of all options that people have actually tried would be of value.
I expect I will be trying this task in the Fall.

Thanks!

Todd Wittbold
Valhöll #207

On Mar 24, 2014, at 10:41 AM, Jonathan Adams <laughing_gull at verizon.net> wrote:

> All,
> 
> After all the discussion a few months ago about getting the coamings off, I took mine off - very hard in cold weather when 5200 was used to bed it down. I go thtem all off in one piece, although I imagine that it is not hard to split things if you try and go too fast.
> 
> Anyway - time to put them back on. Mike L is a fan of the 4000 sealant over 5200 as it has a UV protection the others do not have. Any other suggestions? Any advice in general. These ones are getting so thin versus what they were originally, this i sprobably the last time they come off in one piece!
> 
> All advice appreciated.
> 
> JA
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org


 1395682440.0


More information about the Public-List mailing list