[Public-List] Public-List Digest, Vol 3384, Issue 1

Mike Lehman via Public-List public-list at lists.alberg30.org
Mon Dec 19 04:58:26 PST 2016


Jonathan,

Regardless of the age of the paint, mold will always appear inside a boat.
It's a moist dark environment. Buy some Mr. Clean Magic Erasers, they are
so effective and removing mold and keeping it away, that it only takes a
few minutes in the spring and fall to keep this problem in check. You can
use it on wood too, you'll be amazed.

On Dec 14, 2016 12:04 PM, "Jonathan Bresler via Public-List" <
public-list at lists.alberg30.org> wrote:

> Thank you, John.
>
> The Kilz has held up well over the last 12 years, since being painted in
> 2004.
> 12 years is a LOT to ask of a paint job.  There is currently a bit of mold
> growing
> on the overhead, that is the fault of the current owner.  The son of a gun
> did a
> deep cleaning of the salon, hanging locker, and head but never got to the
> v-berth.
> I'd say he needs to work more and sail less, but he'd keelhaul me!
>
> After 12 years its not surprising that the mold killing properties of Kilz
> should be
> less effective than in the past.   Looking to get the woodworking done this
> winter
> and then paint once the weather warms up.
>
> Jonathan
>
> On Wed, Dec 14, 2016 at 11:59 AM, John Maliszewski <jrmalis at verizon.net>
> wrote:
>
> > Neither the Admiral nor I can remember if the v-berth plywood was painted
> > at that time with Kiltz. Since she was the painting supervisor I just
> > wanted to confirm that with her.
> >
> >
> >
> > I have seen the slats “treatment” of the forward cabin on number of boats
> > and agree that would be my solution as well.
> >
> >
> >
> > John
> >
> >
> >
> > *From:* Jonathan Bresler [mailto:262alberg30 at gmail.com]
> > *Sent:* Monday, December 12, 2016 11:14 AM
> > *To:* John Maliszewski; Alberg 30 Public List -- open to all
> > *Cc:* public-list-request at lists.alberg30.org
> > *Subject:* Re: [Public-List] Public-List Digest, Vol 3384, Issue 1
> >
> >
> >
> > Thank you, John.  Always good to hear from you and learn more about #262.
> >
> >
> >
> > The paint has held up well these 12 years.   Now with the peg board
> > removed, I need to address the area behind
> >
> > which is a different color altogether.   Was the Kilz Original used on
> the
> > top surface of the v-berth plywood as well ?
> >
> > Keeping the same finish paint might be the way to go.
> >
> >
> >
> > Jonathan
> >
> >
> >
> > On Fri, Dec 9, 2016 at 5:25 PM, John Maliszewski via Public-List <
> > public-list at lists.alberg30.org> wrote:
> >
> > Jonathan, the main cabin of your boat (all the white areas) were painted
> in
> > 2004 with Kiltz Original White Low-VOC Oil-Based Interior Primer, Sealer
> > and
> > Stain-Blocker. I do not believe that the intermediate boat owner had done
> > any interior paining, so it should be as we painted it back in 2004 and
> we
> > owned #262 for eight years. When we purchased the boat it had some mildew
> > and stains on the interior surfaces. So after complete bleach scrub we
> > decided to use Kiltz. I think the key is the oil based as they make it as
> > Latex also.
> > John
> >
> > -----Original Message-----
> > From: Public-List [mailto:public-list-bounces at lists.alberg30.org] On
> > Behalf
> > Of via Public-List
> > Sent: Friday, December 09, 2016 12:01 PM
> > To: public-list at lists.alberg30.org
> > Subject: Public-List Digest, Vol 3384, Issue 1
> >
> > Send Public-List mailing list submissions to
> >         public-list at lists.alberg30.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> > or, via email, send a message with subject or body 'help' to
> >         public-list-request at lists.alberg30.org
> >
> > You can reach the person managing the list at
> >         public-list-owner at lists.alberg30.org
> >
> > When replying, please edit your Subject line so it is more specific than
> > "Re: Contents of Public-List digest..."
> >
> >
> > Please do NOT include the entire digest in your reply!
> > ======================================================
> >
> >
> >
> > Today's Topics:
> >
> >    1. Interior/Cabin Paints (Jonathan Bresler via Public-List)
> >    2. Re: Interior/Cabin Paints (Bill Woodford via Public-List)
> >    3. Re: Interior/Cabin Paints (Gordon Laco via Public-List)
> >    4. Re: Interior/Cabin Paints (via Public-List)
> >    5. Re: Interior/Cabin Paints (via Public-List)
> >    6. Re: Interior/Cabin Paints (Gordon Laco via Public-List)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 9 Dec 2016 10:35:38 -0500
> > From: Jonathan Bresler via Public-List
> >         <public-list at lists.alberg30.org>
> > To: Alberg 30 Public List -- open to all
> >         <public-list at lists.alberg30.org>
> > Subject: [Public-List] Interior/Cabin Paints
> > Message-ID:
> >         <CAHEe8TtKSj5cW3jMmQ4RU+oJoErewDsHxZLa9x3yNPRZqr8sTw@
> > mail.gmail.com>
> > Content-Type: text/plain; charset=UTF-8
> >
> > Folks,
> >
> > Took a look at Practical Sailor to see which paints they recommend for
> > painting the overhead, interior of the lockers, etc.  No joy.  Didn't
> find
> > a
> > single article about interior paints.  Deck paints, topside paints,
> bottom
> > paints, bilge paints are all covered, but not interior paints.
> >
> > No doubt that this has been discussed before, wondering what folks are
> > using
> > now.  What have folks used and decided not to use again.
> >
> > The motivating item here is that I removed the Masonite(?) pegboard in
> the
> > v-berth which is used to cover the hull on port and starboard from the
> top
> > of the v-berth to the underside of the deck.  Behind the v-berth is a
> > "lovely yellowish" color.   The wife will NOT be happy with that.  The
> > pegboard one each side of the v-berth was screwed to five shaped teak
> > strips
> > oriented vertically.  Nearly all the teak strips were loose. Now they are
> > all loose and have been labeled for reinstallation.  The teak strips were
> > attached to the hull with three very generous globs of fiberglass
> resin(?)
> > each.  The globs are so thick that there was a clear gap between the teak
> > strips and the hull.  Need to reattach these strips and paint the sides
> of
> > the hull and the overhead before attaching a ceiling to the strips.
> >
> > Couple photos available on request.
> >
> > Jonathan
> >
> > --
> > Jonathan M Bresler
> > S/V Constance Alberg 30 #262
> > Annapolis/Eastport MD
> >
> >
> > ------------------------------
> >
> >
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> >
> >
> >
> >
> > --
> >
> > Jonathan M Bresler
> >
> > S/V Constance Alberg 30 #262
> >
> > Annapolis/Eastport MD
> >
>
>
>
> --
> Jonathan M Bresler
> S/V Constance Alberg 30 #262
> Annapolis/Eastport MD
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>



More information about the Public-List mailing list