[Public-List] What wood....

[Philip Bartlett via Public-List]

Hi Gord 
Windward is #428, a liner boat. 

Philip

Sent from my iPhone 

> On Mar 7, 2016, at 7:40 AM, Gordon Laco via Public-List <public-list at lists.alberg30.org> wrote:
> 
> I don't have a problem with the mast beam... Philip... Is your boat a
> pre-400 boat?  If so, it'll have a toe rail not at all similar to the cap
> rail SURPRISE has...
> 
> G
> 
> 
> 
> On 2016-03-07, 10:36 AM, "picomar1957 via Public-List"
> <public-list at lists.alberg30.org> wrote:
> 
>> Hi just my 2 cents worth but when you do the mast beam install the plywood
>> vertically much more strength and don't need as many layersWhitby did it
>> horizontal probably  to save plywood and labor You will never have to worry
>> about it again
> 
> 
> Sent from my T-Mobile 4G LTE Device-------- Original message
>> --------From: Philip Bartlett via Public-List <public-list at lists.alberg30..org>
>> Date: 3/7/2016  10:03 AM  (GMT-05:00) To: Gordon Laco <mainstay at csolve.net>,
>> Alberg 30 Public List -- open to all <public-list at lists.alberg30.org> Subject:
>> Re: [Public-List] What wood....
> Hi Gord
> Replacing the toe rails is a job I am
>> going to have to do sooner rather than later. I will be very interested to
>> hear how your work progresses.
> 
> When you instal the toe rails are you
>> planning to put them on cold or do you think steaming will be required? Also,
>> are you going to use one or two pieces per side?
> 
> Philip
>