[Public-List] Cutless bearing

[Michael Grosh via Public-List]

FWIW got the new bearing back today with no holes drilled. Since the old
bearing also had no holes drilled, I had Karen (who actually did the
picking up) ask for the scoop. Bottom line, small diameter shafts those
holes are not necessary.
That pretty much conforms with what I found- this is the first time I've
had the bearing off since owning #220 (38 years and thousands of miles). I
was expecting the shaft to be shot, there was no scoring at all on the
bronze.
Your results may vary
MichaelGrosh
#220