[Public-List] Traveller Install

Chris Martin notcmartin at yahoo.com
Thu May 3 12:45:25 PDT 2018


 Thanks all, great info. Maybe a chicken and egg thing. I need to drill a few holes to line it up. Then fill them in to seal the core. Then drill holes again. Then mount, figure out the hardware size.... Seems like allen head or screws will work best for the final installation. Short term I might just need to get something what fits to get it firm enough to mark/drill/fill/mark/drill..... 
I appreciate the help
Chris
    On Wednesday, May 2, 2018, 2:37:03 PM EDT, Zachary Smith via Public-List <public-list at lists.alberg30.org> wrote:  
 
 Don't forget to protect the core from water intrusion.

Zach

On Wednesday, May 2, 2018, Mike Meinhold via Public-List <
public-list at lists.alberg30.org> wrote:

> Chris
>  I agree with others that there is no need to build up the curve - just
> bolt it down and it will conform.
>
>  I recommend you use the largest bolts that fit the chamfered holes in the
> track. Use a single backing plate of aluminum or stainless at each end -
> check the bottom surface to make sure you can fit it flat.
>
> Mike
> Rinn Duin #272
>
> On Wed, May 2, 2018 at 11:27 AM, Chris Martin via Public-List <
> public-list at lists.alberg30.org> wrote:
>
> >  Hi Folks
> > I have a new Garhauer traveller to install and am looking for some
> advice.
> > I have lots of questions and figure some have this setup and might have
> > some pointers for installation. I found some good info in the past but
> I'm
> > ready to get some hardware and didnt see that. What size and type
> > screws/bolts did you use? Also, seems like I can fab some tapered wood
> > pieces to mount the under the traveller or try to make the straight track
> > bend to the deck. Not much of a curve but its there. What works? Any
> other
> > issues I'm not thinking about?
> > Thanks
> > Chris
> > _______________________________________________
> > These businesses support your Association:
> > http://www.alberg30.org/store/A30supporters.html
> > Please support them.
> > _______________________________________________
> > Public-List mailing list
> > Public-List at lists.alberg30.org
> > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> >
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>
_______________________________________________
These businesses support your Association:
http://www.alberg30.org/store/A30supporters.html
Please support them.
_______________________________________________
Public-List mailing list
Public-List at lists.alberg30.org
http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
  


More information about the Public-List mailing list