[Public-List] Traveller Install

[Gordon Laco]

I bent my traveller down to the camber with no problem either…. I used longer bolts on the ends and worked from the middle out port and starboard.  

Gordon Laco
www.gordonlaco.com




> On May 2, 2018, at 2:06 PM, Wes Gardner via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Hi Chris,
> 
> Here's a link to a pic.  The red line is the traveler control.
> https://www.dropbox.com/s/5a1y7k53clyhgm8/Turning%20block%20after.jpg?dl=0
> 
> Wes
> 
> On Wed, May 2, 2018 at 2:01 PM, Wes Gardner <wesgardner1952 at gmail.com>
> wrote:
> 
>> Hi Chris,
>> 
>> Additionally, mine is a Lewmar traveler that came with cam cleats at
>> either end for stopping off the traveler control line.  I bent mine up at
>> an angle so they are easier to get the line back into the jaws of the cam,
>> made alot of difference!
>> 
>> Wes
>> 
>> On Wed, May 2, 2018 at 1:50 PM, Wes Gardner <wesgardner1952 at gmail.com>
>> wrote:
>> 
>>> Hi Chris,
>>> 
>>> The one I installed isn’t Garhauer, but mine did bend to the camber of
>>> the deck without any issue. My guess is that yours will to. Use fender
>>> washers on the underside and you’ll be fine
>>> 
>>> Wes
>>> #196
>>> 
>>> Sent from my iPhone
>>> 
>>>> On May 2, 2018, at 11:27 AM, Chris Martin via Public-List <
>>> public-list at lists.alberg30.org> wrote:
>>>> 
>>>> Hi Folks
>>>> I have a new Garhauer traveller to install and am looking for some
>>> advice. I have lots of questions and figure some have this setup and might
>>> have some pointers for installation. I found some good info in the past but
>>> I'm ready to get some hardware and didnt see that. What size and type
>>> screws/bolts did you use? Also, seems like I can fab some tapered wood
>>> pieces to mount the under the traveller or try to make the straight track
>>> bend to the deck. Not much of a curve but its there. What works? Any other
>>> issues I'm not thinking about?
>>>> Thanks
>>>> Chris
>>>> _______________________________________________
>>>> These businesses support your Association:
>>>> http://www.alberg30.org/store/A30supporters.html
>>>> Please support them.
>>>> _______________________________________________
>>>> Public-List mailing list
>>>> Public-List at lists.alberg30.org
>>>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
>>> 
>> 
>> 
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org