[Public-List] Rivet for mast rail

[Eric Chavigny]

I went thru my small inventory here and I have aluminum 3/16 rivet with aluminium pins on hand.

I am planning to go up in the mast tomorrow if the wind allows it.

Thanks for the input.

Sent from my iPhone

> On Jul 29, 2019, at 15:00, Michael Connolly via Public-List <public-list at lists.alberg30.org> wrote:
> 
> Eric and others.
> I always thought the the sail track rivets on #133 were 1/8" aluminum.  Because of the design and the tremendous number of rivets in place I would think aluminum rivets would be fine.  Eric if you purchase aluminum rivets just make certain that the pulling pin is aluminum and not steel.  Start by drilling out a loose rivet with an 1/8" drill bit. If the rivet comes out clear from it's hole then you know you have an 1/8" original rivet if not go to the next larger size which would be 3/16". I would start small and then go larger only if need be.
> What do others think about SS rivets into an aluminum mast and corrosion issues?  Eric would have to use some sort of isolation material when using SS rivets into Aluminum. I for one would not want to introduce the corrosion issues and just go with the Aluminum rivets.
> My two cents,
> Michael #133
>> On July 28, 2019 at 6:38 PM Eric Chavigny via Public-List <public-list at lists.alberg30.org> wrote:
>> 
>> 
>> A short section of our mast rail for the main sail is slightly separate from the mast and I want to remove the rivet redo it so the rail is fully seated on the mast.
>> 
>> Anyone know the rivet size for these?
>> 
>> Thanks
>> 
>> Dimanche Matin #541
>> 
>> Sent from my iPhone
>> _______________________________________________
>> These businesses support your Association:
>> http://www.alberg30.org/store/A30supporters.html
>> Please support them.
>> _______________________________________________
>> Public-List mailing list
>> Public-List at lists.alberg30.org
>> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
> _______________________________________________
> These businesses support your Association:
> http://www.alberg30.org/store/A30supporters.html
> Please support them.
> _______________________________________________
> Public-List mailing list
> Public-List at lists.alberg30.org
> http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org