[Public-List] Nut splitters

[dterrell1 at charter.net]

my understanding - and I was feeling around back there is putting
another rod in would be impossible. I think that the three bolts that
I can get at are sufficient to support the pump. Better to split the
nut and put a new one on later. I also think this may be easier said
than done.
David

	-----------------------------------------From: "Kris Coward via
Public-List" 

To: "Alberg 30 Public List -- open to all"
Cc: "Kris Coward"
Sent: Wednesday July 5 2023 4:37:58PM
Subject: Re: [Public-List] Nut splitters

 A Dremel tool is a lot likelier to cut into the threads of the
bolt/stud/rod that the nut is threaded on, so if you apply that fix
often enough, you'll also have to replace said bolt/stud/rod (which
will inevitably turn out to be awkwardly situated, and seized in
something else for good measure)

 -Kris

 --
 Kris Coward
https://unripe.melon.org/
 />

 ------- Original Message -------
 On Wednesday, July 5th, 2023 at 16:40, Jim Davis via Public-List 
wrote:

 > For something as small at these nuts has anyone considered a Dremel
tool with a one inch diameter cut off wheel. Then go to the hardware
store and buy a complete set of new machine screws and nuts.
 >
 >
 > Jim Davis
 > Prairie Schooner
 > Meddle not in the affairs of dragons, for you are crunchy, and
taste good with ketchup.
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 >
 > _______________________________________________
 > These businesses support your Association:
 > http://www.alberg30.org/store/A30supporters.html
 /> > Please support them.
 > _______________________________________________
 > Public-List mailing list
 > Public-List at lists.alberg30.org
 > http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 /> _______________________________________________
 These businesses support your Association:
 http://www.alberg30.org/store/A30supporters.html
 /> Please support them.
 _______________________________________________
 Public-List mailing list
 Public-List at lists.alberg30.org
 http://lists.alberg30.org/listinfo.cgi/public-list-alberg30.org
 />